Will the Replacement Schrader Valve Fitting for Firestone Coil-Rite Springs Work with Air Lift 1000?

Question

Question:

Will part number F3438 fit on airlift 1000 HD bag?

asked by: Mark O

0

Expert Reply:

Yes, the Replacement Schrader Valve Fitting for Firestone Coil-Rite Air Helper Spring # F3438 will work with the Air Lift 1000 Heavy Duty Air Helper Springs for Coil Springs # AL60828HD as it is designed to work with standard 1/4" tubing.

expert reply by: Bryce D

0

Answer 1

Hi Brad, Yes, the Draw-Tite #65033 sits much lower to clear the air dam, while the Curt Front Mount Trailer Hitch Receiver #31320 sits higher, requiring you to trim the air dam. These both have a 5,000lb capacity so you should definitely make sure…

view full answer...

Answer 2

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 3

I do not recommend cutting the bag from your Air Lift 1000 Air Helper Springs for Coil Springs - Rear #AL60818 as you could potentially hurt yourself or damage other components of the air springs or your vehicle. These bags were designed to be able…

view full answer...

Answer 4

Both the Firestone Coil-Rite Air Helper Springs part #F4185 and the Air Lift AirLift 1000 Air Helper Springs part #AL60818 are good options for your 2017 Ram 1500. The only real difference between the two is their pressure rating. As you previously…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will the Replacement Schrader Valve Fitting for Firestone Coil-Rite Springs Work with Air Lift 1000?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching