How To Turn off Start/Stop on a 2022 Jeep Gladiator and Upgrade to LED Lights  

Question:

Expert Reply:

The Superchips Wireless Flashcal+ Calibration Tool part # SU27SR which is a fit for a 2022 Jeep Gladiator with 3.6L V6 Engine will allow you to disable the stop/stop feature and upgrade the following locations from incandescent to LED without issue; front turn, tail lights, third brake light. In addition to these features, you'll also be able to do the following:

- CRAWL Screen (illustration above) acts as a live and on-the-fly interface: Front and Rear Differential Lock, TPMS Adjust, Engine RPM idle up (CRAWL features vary by year and trim level of vehicle)
- Tire Size Wizard - Self-calibrates speedometer with your phone's GPS. No need to enter data manually, and you don't even have to get out of your Jeep. (You can still enter tire size by height the old-fashioned if you want.)
- Live Data Monitoring with customizable gauge display, as well as reading and clearing trouble codes (CELs)
- Service Options menu for home repairs: ABS Initialization, Brake Pedal Relearn, Cam/Crank Sync
- Reset modules option for ABS (anti-lock brakes), BCM (body control module), TPMS (tire pressure monitoring), and IPC (instrument panel cluster) modules
- Bluetooth connection from wireless dongle to Android or iPhone, and no wires to run
- Engine idle up for winching, temporarily with CRAWL Screen, 500-2000 RPM
- Sway Bar Disconnect in 2Hi, up to 25 MPH (CRAWL Screen, Rubicon only)
- Line Lock- holds brakes on front tires only
- Rock Lock- holds all 4 wheels with brakes for crawling
- Axle Gear Calibration: 2.73 – 5.38:1
- Tire Size Calibration by height: 26” – 40”
- Transfer Case Gear ratio calibration: 2.72 – 5.00:1
- TPMS Warning Threshold adjust: 22–56 psi.
- TPMS Disable, for aftermarket wheels and no sensors
- TPMS Off/On (Crawl Screen)
- Daytime Running Lights Operation: Always On, Selectable, or No DRL
- DRL Location Selector: Fog, Fender, Running, High, Low, Turn, or No DRL
- DRL Dropout Disable, keeps DRL on when using turn signal
- Fog Lights Dropout Disable, for simultaneous use of high beams and fog lights
- Halo Lights Enable or Disable
- One Touch Lane Change Enable
- Dashboard boot up Splash Screen selection: Rubicon, Sahara, Sport
- Seat Belt Minder Disable, stops chime
- Disable or Enable Travel Link Weather Warning
- Auxiliary Switches Enable, to add extra factory Aux switches* and control added electrical accessories
- Blind Spot Detection Disable, or Enable to add if not equipped*
- Factory Fog Light Switch Enable, adds controls if not equipped*
- Towing Package Enable, adds controls if not originally equipped*
- Electronic Steering Pump Disable, for conversion to hydraulic system*
- Axle Lockers Disable Rear Only, OR Front and Rear for conversion to manual*
- Axle Lock Rear OR Front and Rear w/ T-case in 4-Hi & 4-Low (CRAWL Screen, Rubicon Only)

expert reply by: Conner L

0