Does CE Smith Trailer Hub Assembly Come With Grease Cap

Question

Question:

does this part come with a grease fitting? see one on video but do not see one on still photos?

asked by: George P

0

Expert Reply:

While I'm not 100 percent certain what part you are referring to specifically in regards to grease fitting, the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 comes with the grease cap and grease seal, along with the bearings, races, lug nuts, cotter pin, and carrying case.

expert reply by: Kyle S

0

Answer 1

Hey Alfonzo! To replace the hub on a Malone EcoLight Sport Trailer like item #MAL53FR you'll want the CE Smith Trailer Hub Assembly w/ Carrying Case item #CE13311.

view full answer...

Answer 2

Yes, it will Jason. The CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles item #CE13311 will indeed replace the hub on the Malone LowBed MicroSport Trailer item #MAL25FR. This hub comes pre-greased with pre-installed bearings and is…

view full answer...

Answer 3

Hi Michael! The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs #CE48870 uses the fairly standard and easy to find #L44649 bearing (inner and outer) and #RG06-010 seals. With that said, you can…

view full answer...

Answer 4

Hey Gene. The Malone MicroSport LowBed Off-Road 2 Kayak Trailer Package item #MAL37ER has a top speed of 65 mph. The off road tires included with the trailer are 10 ply 205/65-10 Load range E. We have the Loadstar K399 Bias Trailer Tire item #AM1HP56…

view full answer...

Answer 5

From what I have found, the StarBrite Marine Grease you are talking about has a Lithium Complex base type. The grease used in the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased #CE13311 is a Calcium…

view full answer...

Answer 6

Hey Todd! The CE Smith Multi Sport Plus Boat and Kayak Trailer item #CE48870 uses item #CE13311 hubs. The correct replacement grease seal is item #34823, which has a inner diameter of 1.249" and an outer diameter of 1.983". Let me know in…

view full answer...

Answer 7

Hey there Gary, while we have the correct hubs you need, there is not a kit from CE Smith for this setup. You'd instead want the Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 #AKIHUB-545-2-G-1K which is galvanized marine grade. The…

view full answer...

Answer 8

Hey Jesse, I recommend the etrailer idler hub #AKIHUB-545-2-G-1K as a replacement for your trailer. It is the same 5 on 4-1/2 bolt pattern as your trailer and uses the same bearings for that 1" spindle that the acle uses. It does not come with a…

view full answer...

Answer 9

For the CE Smith Trailer Hub Assembly #CE13311 you'll need a spindle for a 2,700 lb axle. We don't have one that works with that hub, but you'll just need to look for one that uses bearings L44649 for both the inner and outer bearing.…

view full answer...

Answer 10

We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer #MPG460G. What you will need is the following: - Bearing Kit #BK1-100 - Grease Cap #F001518 - LubriPlate Poly HP-2 Wheel…

view full answer...

Answer 11

The CE Smith trailer hubs we offer that are pre-greased like the part #CE13311 come with the LMX Red grease like the #L11390.

view full answer...

Answer 12

Based on that information you have #L44643 bearings and a #34823 grease seal on your Malone MicroSport. For a galvanized replacement hub you can use the #AKIHUB-545-2-G-1K. This will fit your BT8 spindle and has the 5 on 4-1/2 bolt pattern you need.…

view full answer...

Does CE Smith Trailer Hub Assembly Come With Grease Cap

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching