Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
Updated 09/02/2025 | Published 06/18/2025
Products Featured in This Question
Question:
Will this hub replacement fit part MAL25FR, Malone Lowbed Microsport? Thanks
asked by: Jason
0
Expert Reply:
Yes, it will Jason. The CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles item # CE13311 will indeed replace the hub on the Malone LowBed MicroSport Trailer item # MAL25FR. This hub comes pre-greased with pre-installed bearings and is ready to install. It is sold individually.
Why are you needing to replace a hub?
expert reply by:
Jerred H
0
CE Smith Trailer Hub Assembly
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight Spindles
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Hard Tonneau Covers vs Soft Tonneau Covers
- Article: Trailer Wiring Diagrams
Jerred H.
9/2/2025
Hey Jason, did you have a chance to replace the hub on your Malone LowBed MicroSport Trailer? I'm curious to know how it worked out for you, as it could help others with similar trailers.