bing tracking image

Review of CE Smith Trailer Hubs and Drums - Hub - CE13311

content loading

Customers compare CE13311 to these similar products




Products Featured in this Video



CE Smith Trailer Hubs and Drums - Hub - CE13311 Review


Today, we're going to take a look at the CE smith pre-greased trailer hub assembly, and this hard carrying case for 2,700 pound axles, but the five on four and a half inch bolt pattern. Now this is how you would receive it, comes in this nice hard plastic carrying case with the handle, keeps all your parts all in one place. And then when you open it up, you'll see your hub assembly is all in one bag and pre-greased. And then your other bag has the grease cap, lug nuts and cotter pin all in a separate bag. Now zinc plating on these lug nuts, the cotter pin and grease cap helps limit corrosion. Now this kit will replace one hub assembly on your trailer.

It does include the inner and outer bearings all installed, the bearing races, the grease seal. And again, they're all pre-greased. The grease seal is actual double-lip grease seal right here on the back here helps keep moisture out in the grease in.So this whole kit is perfect for storing on board your trailer in case of an emergency, keeps all the parts in one location. Again, it's pre-greased with heavy duty marine-grade lubricant so it is ideal for boat trailers. The hub itself is a strong cast iron hub.

It's painted black and it is made in the USA. Few specs on this again, this is for 2,700 pound axles. The maximum wheel diameter used on this will be 14 inches. The bolt pattern is a five on four and a half inch bolt pattern. The wheel stud size is a half inch diameter.

Now the hub inner diameter is 1.98 inches. The hub flange outer diameter, which would be this dimension here is five and a half inches. Weight capacity on this one hub assembly is 1,350 pounds. So when this is used with one on the other side of the axle, it'll meet you at 2,700 pound axle rating. The bearings are included in here.

They use the same part number, inner and outer bearings, part number L44649. Bearing races are pre-installed. And the grease seal we mentioned is all included. The grease seal is part number 12192TB.But again, it's nice because you can keep this all together, put it back in the bag. You can set it back in there and you can take your other parts and then just close it up, snap it into place and you got everything all in a nice, hard plastic carrying case, but that should do it for the review on the CE Smith pre-greased trailer hub assembly with the hard carrying case for 2,700 pound axles with the five on four and a half inch bolt pattern..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.