Recommended SumoSprings that fit a 2019 Tiffin Allegro Open Raod Motorhome

Question

Question:

I recently purchased a 2019 tiffin, want to add sumo springs. According manufacturers build sheet they were installed a factory. I guess someone or dealer removed so I have nothing there, not even the Ford factory bump stop. What size is the bolt to attached the top summo springs? Do you have that and can I order with kit. Thanks

asked by: Max F

0

Expert Reply:

The bolt that is attached to the top of the SumoSprings Rebel Custom Helper Springs - 2 Piece # SSF-173-40-2 is a 3/8" x 3/4" flange bolt.

This bolt is not offered as a separate part but you could easily go down to your local hardware store and pick up this bolt or if you buy the SumoSprings Rebel Custom Helper Springs - 2 Piece # SSF-173-40-2 which is a confirmed for your 2019 Tiffin Allegro Open Road Motorhome, it'll come with the kit.

these springs have a maximum weight capacity of 3,000-lbs (at 50-percent compression) is made in the USA, and will work in temperatures ranging from -25°F to 200°F.

expert reply by: Bryce D

0

Answer 1

When It comes to installing Suspension Enhancement on your 2019 Tiffin Open Road Allegro, The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 would work good. The SumoSprings have a 3,000 capacity and will upgrade your…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Hey Gary, welcome back! The Safe-T-Plus #ST88MR is spring-based and reactive, so it corrects steering after you start to drift. It’s simple, solid, and proven. The steering will be firmer with this system installed, so if that is what you prefer I…

view full answer...

Answer 10

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 11

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 12

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Recommended SumoSprings that fit a 2019 Tiffin Allegro Open Raod Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching