Trailer Hitch and Vehicle Wiring Recommendation for a Single Exhaust 4-cylinder 2006 Hyundai Sonata

Updated 01/21/2014 | Published 01/20/2014

Products Featured in This Question

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(123)

$194.18

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(88)

$43.89

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2621)

$16.53

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$18.47

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K

(2328)

$32.46

Question:

will this fit a 2006 sonata 4 cyl single exhaust. do you have a connection kit for lights

asked by: Richard L

Expert Reply:

Yes, the Draw-Tite Class I trailer hitch will fit all models of the 2006 Hyundai Sonata, including your 4-cylinder with single exhaust. Our tech tips note that vehicles with single exhaust, the appearance panel which covers driver's side frame rail must be removed.

This is a Class I rated hitch that is rated for towing up to 2,000 pounds gross towing weight and 200 tongue weight, and is compatible with Class I 1-1/4 accessories only. Since it is Class I hitch, the manufacturers recommended ball mount should be used, and for this hitch it is # 3592. Depending on your towing needs, if you need a 2 inch trailer ball that would be # 19258, if you need a 1-7/8 trailer ball then you would need #19256. These trailer balls are compatible with the ball mount listed above.

We do have a T-one style trailer lighting that will establish a 4-flat vehicle connection for you, and that is the Tow ready harness # 118433. This is a powered converter and features an integrated circuit protector that prevents feedback from the trailer to your vehicle wiring.

I have provided links to the parts listed above, several videos, and several helpful articles for you about trailer hitches for your reference.