We'll connect you with nearby partnered installers who know this exact setup.

TorkLift

TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers

Part Number: TLF1005H

5 Reviews | 43 Questions

In Stock

$717.74

Retail:$830.66

You Save: $112.92

Not Confirmed to Fit

1958 Dodge Full Size Pickup

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

torklift trailer hitch for towing class iv

torklift trailer hitch class iv 1500 lbs wd tw tlf1005h

torklift trailer hitch for towing 1500 lbs wd tw superhitch hero receiver - custom fit class iv dual 2 inch receivers

torklift trailer hitch for towing 1500 lbs wd tw

torklift trailer hitch class iv 15000 lbs wd gtw tlf1005h

torklift trailer hitch for towing class iv superhitch hero receiver - custom fit dual 2 inch receivers

torklift trailer hitch 15000 lbs wd gtw 1500 tw tlf1005h

Show All (8) Product Images

Show Fewer Product Images

Customer Photos

TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers customer photo

Show All (5) Customer Images

Show Fewer Customer Images

Videos

TorkLift Breaks Down the SuperHitch and SuperTruss

Show All (1) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions. Great Prices for the best trailer hitch from TorkLift. TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers part number TLF1005H can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (5)
Q & A (0)
Related Parts
Photos

TorkLift Trailer Hitch - TLF1005H

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Dual 2" Receivers: Tow a trailer while using a bike rack or cargo carrier at the same time
Tows up to 8,000 lbs (GTW) / 15,000 lbs WD GTW: Handles heavy-duty towing needs
Holds up to 800 lbs (TW) / 1,500 lbs WD TW: Supports large loads and weight distribution setups
Bolt-On Installation: Mounts under your factory hitch with included hardware, no welding needed
Corrosion-Resistant Finish: Black powder coat helps protect the steel hitch from rust and wear

Features to know about

Tow and Haul at the Same Time: Dual 2" Receivers for Extra Utility

The SuperHitch Hero gives you two stacked 2" x 2" receivers so you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at once. The single cross tube installs under your factory hitch and keeps both receivers strong and stable. With an 8,000-lb maximum gross trailer weight, 800-lb tongue weight, and up to 15,000-lb GTW and 1,500-lb TW when used with weight distribution, it keeps you ready for heavier hauls without sacrificing carrying options.

Built Strong for Heavy-Duty Use: Steel Construction with Reinforced Pin Holes

This hitch is made from sturdy steel with high-penetration, dual-shield welds that hold up under serious towing jobs. The hardened, reinforced hitch pin holes resist wear so the connection point stays tight over time. Safety chain loops are built in, and the black powder coat finish helps fight corrosion so the hitch stays looking clean and solid even after years of use.

Expand Your Setup for Campers and Extensions: Pre-Drilled for Tie-Downs and SuperTruss Use

If you’re hauling a bed camper or need more clearance behind your truck, this hitch is ready for it. It’s pre-drilled to accept TorkLift camper tie-downs (sold separately) and designed to work with SuperTruss extensions (sold separately) to push your connection point back for better clearance. That means you can tow a trailer while your camper’s installed or run a longer setup without losing capacity.

TorkLift SuperHitch Hero installed on a truck with SuperTruss extension showing dual 2-inch receivers used for towing and cargo setup

Easy Bolt-On Install: No Welding Required

The bolt-on design mounts beneath your existing hitch with included hardware—no welding or drilling into the frame. It’s a straightforward way to step up your towing capacity while keeping everything aligned and integrated with your current setup.

Specs

Receiver Dimensions

Receiver openings: 2" x 2"

Class Rating

Rating: Class IV

Weight and Capacity

Maximum gross trailer weight: 8,000 lbs
Maximum GTW when used with weight distribution: 15,000 lbs
Maximum tongue weight: 800 lbs
Maximum TW when used with weight distribution: 1,500 lbs

Warranty

Lifetime warranty

F1005H Tork Lift Hero Super Hitch with 2 Receivers

This Product Fits The Following Vehicles

2009 - 2014 Ford F-150 with factory hitch
2010 - 2014 Ford F-150 Raptor with factory hitch

4.2

5 reviews

5 Stars		(2)
4 Stars		(2)
3 Stars		(1)
2 Stars		(0)
1 Star		(0)

by: Michael E 03/11/2016 One Year Later

2013 Ford F-150

I can't say enough good things about this product. There is no rust. Nothing is loose or needed tightening. The welds, especially at the reinforced hitch pin, are very robust. Even the weight labels are still shiny. I don't baby it. It's muddy out at the barn. It rains here a lot. I pull a heavy tongue toy hauler (the reason I bought it) and a horse trailer with it. My toy hauler exceeded the tongue weight of my original receiver, but this one has no problem with it. Everything looks like the day I put it on the truck. I really liked that I didn't have to remove my stock receiver to increase its capacity. I highly recommend this receiver, especially to anybody considering pulling a toy hauler with an F150 and wanting to stay within the ratings of their truck.

Click to Enlarge

by: Edward 01/07/2020

2013 Ford F-150

Tongue deadweight for the factory hitch, '13 F150, SCREW, 5.5 bed, was 500 lbs and the actual tongue weight of my aluminum toy hauler was 650 lbs. Not a good match. The Torklift Super Hitch, deadweight (tongue) rated at 800 lbs was the practical answer and opened up additional towing options. The installation, 2-man, was about an hour included reading the installation instructions (not included with hitch). An immediate observation I had was the need for supplemental links at the hitch to ease safety chain attachment is no longer necessary.

Click to Enlarge

by: Jared 05/07/2018 One Year Later

Chevrolet Silverado 1500

Good product and glad I purchased. This is the only class V hitch for an F-150 as I needed one that would hold my travel trailer tongue weight of 1500 pounds. It does and haven't had a problem with it. I'd give it 5 stars and while it's not Torklift's issue, etrailer doesn't offer military discounts. I've spent thousands of dollars on their products and after multiple requests, still refused to do so. Disappointing for a company in my home state of Missouri. Torklift makes fine products and this is no exception.

by: Steve 11/07/2023

2014 Ford F-150

Quick shipping good quality. Fit well 2 hours to install.

Steve One Year Later

11/8/2024

1 year instilation took about two hour. Hitch was a good fit quality material

Steve One Year Later

11/12/2024

Easy to install quality product I would recommend .

by: Robert 12/10/2017 One Year Later

Great hitch, boat tows better and has improved the balance,

Robert One Year Later

12/10/2018

Could not be better, THE Answer to a towing issue.

true

See what our Experts say about this TorkLift Trailer Hitch

Do you have a question about this Trailer Hitch?

Availability Of Class 4 Hitch For 2013 Ford F-150
Hello Mike, thanks for reaching out. We do offer a higher rated hitch for the 2013 Ford F-150 with the factory hitch. For that I recommend the following: - TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers # TLF1005H This hitch is rated at 800TW/8,000 lb towing. Please note this hitch is intended for short bed models and it will only fit vehicles with the factory hitch rated for 10,500 lbs. It will NOT fit models with the 11,500 lb rated factory...
view full answer...
Recommended Trailer Hitch for a 2012 Ford F-150 W/ OEM Hitch
Hey Eric, so you already have a hitch and you want to change it out with another 2" hitch? If that's the case, then you can use the TorkLift SuperHitch Hero Trailer Hitch Receiver # TLF1005H, which will replace your current one, has a 2" receiver as well, and has a nice 8,000 lb towing capacity. This hitch will directly take the place of your current one so it'll work great with your exisiting wiring harness. If you need anything else, please feel free to drop a comment and let me know!
view full answer...
Torklift Hitch for 2017 Ford F-150 6.5 ft Bed to Use 36 inch Long Torklift Hitch Extension
Hey Randy, yes it would work for your truck. For your 2017 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers # TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what you have. This will give you the ability to use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers 36 inch long # TLE1536
view full answer...
Availability of Hitch for 2013 Ford F-150 With Factory Installed Tow Hitch
There are two ways to add a hitch to your 2013 Ford F-150 that already has a factory hitch installed. The first is to add the TorkLift # TLF1005H. This is only designed for short bed models and trucks with a factory hitch rated for 10,500 lbs. It also installs along with the factory hitch instead of replacing it. The second option is to use the Draw-Tite Max-Frame # 75691 you were looking at. However, you can't simply install it by removing the existing factory hitch. You will need to...
view full answer...
Trailer Hitch and Extension for 2013 Ford F-150 to Tow Trailer with Tailgate Down
for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers # TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it sounds like you have. This will give you the ability to use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524 or the 36 inch long # TLE1536 you mentioned to give you the clearance required for your...
view full answer...
Replacing the Factory Hitch on a 2011 Ford F-150
We might have a solution for you, but I cannot confirm if the reinforcement bracket for your 2011 Ford F-150 is capable of supporting the bumper and an aftermarket hitch. The OEM hitch on your F-150 is welded to the brackets that support the bumper. Removing the hitch and brackets and replacing that with the reinforcement beam doesn't guarantee an aftermarket hitch can be used. However, if you are worried about your factory hitch's towing capability, we do have a hitch that can be installed...
view full answer...
Recommended Heavy Duty Trailer Hitch for a 2010 Ford F-150 With a Factory Hitch
With there already being a factory hitch installed on your 2010 Ford F-150, we do have an option to up the tongue weight capacity. That being said, there are no Class V hitches that we have available for your vehicle, so this will be a Class IV hitch as well. The TorkLift SuperHitch # TLF1005H is rated up to 1,500 pounds when used with a weight distribution system. The only problem with this hitch is that it sits under the factory hitch, which will affect how the weight distribution hitch...
view full answer...
Aftermarket Hitch Options for 2010 Ford F150 With Bent OEM Hitch
I did some checking, and found that the hitch on your 2010 Ford F-150 is fully integrated into the bumper brackets so you can't just remove the existing OEM hitch and replace it with an aftermarket hitch like the Draw-Tite # 75691 you'd looked at. That's the bad news, but there are options. • You can go to a salvage yard and find a 2009-2014 F-150 that wasn't equipped with the factory hitch, and get the bumper and bumper brackets off of it and use those to replace what's existing on...
view full answer...
How to Tell if Hitch Will Fit 2010 Ford F-150 With Factory Hitch
Most times manufacturers say "without factory hitch" because if you have the factory hitch it will get in the way of installing the aftermarket one. Also, some hitches are welded on and cannot be removed, so you'll want to see if the hitch on your 2010 Ford F-150 is welded on or attached with bolts. If it simply has bolts and is removable you can install the Curt Trailer Hitch Receiver # C14002. Otherwise the only option to add a hitch to go with your factory hitch - so long as you have...
view full answer...
How To Upgrade the Factory Trailer Hitch On a 2010 Ford F-150
The factory trailer hitch on your 2010 Ford F-150 has a class III rating. This will be sufficient to tow your boat and trailer but if you would like to upgrade to a class IV then the only option for this is the TorkLift SuperHitch Hero Trailer Hitch Receiver part # TLF1005H. The other options for your F-150 will not work because the bumper brackets are all integrated into the trailer hitch which was pointed out by the dealer. Please note, due to the weight of your trailer you will want...
view full answer...
Trailer Hitch Recommendation for 2013 Ford F-150 w Factory Hitch with Higher Capacities
We have one hitch that is a fit for your 2013 Ford F-150 with a factory hitch that meets your criteria. The Torklift hitch part # TLF1005H has a tongue weight capacity of 1,500 lbs when used with a weight distribution system and is a fit for the versions of your vehicle that have a factory hitch. You will need to check either with Ford or your owners manual to determine if with an upgraded trailer hitch your truck has the needed capacity to take advantage of the capacity of the Torklift hitch.
view full answer...
Upgraded Trailer Hitch for a 2013 Ford F-150 To Increase Tongue Weight Capacity
I do have an option for you but the factory trailer hitch on a 2013 Ford F-150 cannot be replaced because it is tied into the rear bumper. Therefore, the Curt Trailer Hitch Receiver part # C14002 which is for models without the factory trailer hitch will not work for you. However, we do have one option that will install under the factory trailer hitch which is your only option because the factory trailer hitch again cannot be removed. The TorkLift SuperHitch Hero Trailer Hitch Receiver...
view full answer...
Is Weight Distribution Required on 2014 Ford F-150?
Thank you for the information you provided, and I'll start by telling you that as a general rule it is a good idea to follow the recommendations of the vehicle manufacturer in regards to towing. Do you HAVE to use a weight distribution system if you're within the limits of both your equipment and the law? No, but if it adds to the safety of yourself, your passengers and other drivers, then there really is no reason not to. In regards to your specific equipment trailer, you mentioned that...
view full answer...
Trailer Hitch Receiver for 2013 Ford F-150 Raptor With Factory Hitch
There is one hitch receiver that will work for your 2013 Ford F-150 Raptor that has the factory hitch, but the Curt you asked about will not; the only hitch that can work is the TorkLift SuperHitch Hero Trailer Hitch Receiver # TLF1005H. This hitch will fit only if your Raptor's factory hitch is rated up to 10,500 lbs; if it has the higher-rated 11,500 lb capacity hitch it will not fit.
view full answer...
Hitch Recommendation For My 2013 Ford F-150 With Factory Hitch
When installing a trailer hitch onto your 2013 Ford F-150 that already has a factory hitch on it, The TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2 inch Receivers # TLF1005H is your only option. It has a gross towing capacity up to 8,000 pounds and a tongue weight up to 800 pounds. Make sure to double check with your vehicle's manual to know the proper towing capacity for your vehicle. It has a simple bolt-on installation and it has a black powder coat...
view full answer...
High Capacity Trailer Hitch Recommendation for 2011 Ford F-150
We have one trailer hitch that fits your 2011 Ford F-150 with a factory hitch and it happens to have rather high towing capacity of 8,000 lb trailer weight and 800 lbs tongue weight without weight distribution and 15,000 lb total trailer weight and 1,500 lb tongue weight with weight distribution. For that you'd want the Torklift part # TLF1005H. I attached a help article on weight distribution system for you to check out as well too.
view full answer...
Curt Trailer Hitch # C14002 Compatibility if Factory Hitch is Removed
The Curt Trailer Hitch Receiver # C14002 will fit your 2013 Ford F150 once your factory hitch is removed. It will allow you to tow at a higher capacity than your factory hitch without using weight distribution as you mentioned. The factory hitches are often welded to the frame, so if that is the case you would need to have the hitch cut off to install the replacement. All of the aftermarket hitches apart from the TorkLift SuperHitch Hero Trailer Hitch Receiver - Dual 2" Receivers # TLF1005H...
view full answer...
Trailer Hitch And Wiring Recommendation For 2014 Ford F-150 With No Tow Package
The hitch I recommend for your 2014 Ford F-150 is the TorkLift Trailer Hitch, part # TLF1005H. This is a Class lV hitch and has a dual 2 inch receiver opening. This hitch comes with 2 pins and clips so you can carry a hitch mounted carrier or bike rack while you tow. We also offer an adjustable shank for this hitch, part # TLM9000. This is a 12-3/4 inch long shank and is designed to fit the SuperHitch. If you need a ball mount for the adjustable shank I recommend the Magnum Ball Mount...
view full answer...
Recommendations for Towing 9,600 Pound Trailer with 2013 Ford F-150
I completely understand your confusion, as pinpointing a truck's actual towing capacity proves time and time again to be one of the more frustrating experiences for our customers. As you alluded to in your question, you are going to be restricted by your weakest link so if your hitch is rated for less than the truck, you have to adhere to the hitch's limits. I wasn't able to verify the factory trailer hitch capacity on your F-150 but there should hopefully be a sticker right on the hitch...
view full answer...
Can a Trailer Hitch with Higher Tongue Weight Capacity Install on a 2014 Ford F-150 w/Factory Hitch
I did some checking and in the owner's manual for the 2014 Ford F-150 it indicates a gross trailer weight capacity of 5,000 pounds UNLESS the truck has the heavy duty trailer towing package. If it does have the heavy duty towing package it does not give a value for the max tongue weight but just says 10 to 15 percent of the gross trailer weight. Then there are tables that show the various gross combined weights of the various models of the 2014 F-150. Which doesn't make too much sense since...
view full answer...
Increasing Towing Capacity of 2011 Ford F-150 With Factory Hitch
We offer a specialty hitch for the F-150 with installed factory hitch that mounts underneath the factory hitch to provide you with dual receivers. This hitch # TLF1005H from TorkLift is shown as fitting 6-1/2-foot bed trucks fitted with factory hitches rated up to 10,500-lbs. It offers a maximum tongue weight of 800-lbs and a maximum towing capacity of 8000-lbs. We also offer standard 2-inch Class III and Class IV hitches that can replace your factory hitch. The most popular hitch for...
view full answer...
Trailer Hitch for 2009 Ford F-150 With Factory Hitch Installed
There is a Class IV hitch that could work for you, though it is not a replacement for the factory hitch on your 2009 Ford F-150. The TorkLift SuperHitch # TLF1005H only works on short bed models of '09 F-150 with factory hitches that are rated up to 10,500 lbs. The TorkLift installs under the factory hitch, giving you a pair of receivers. It has a 2" receiver, maximum towing capacity of 8,000 lbs, max tongue weight of 800 lbs, comes with 2 hitch pins and clips, and is a bolt-on installation...
view full answer...
Hitch Recommendation for a 2014 Ford F150 to Carry Heavy Motorcycle Carrier
Since your truck has a factory hitch on it currently the only hitch we offer that is a confirmed fit for your 2014 Ford F150 is the Torklift Hitch part # TLF1005H. This hitch has a tongue weight capacity of 800 lbs which would be enough for the tongue weight of 665 lbs you would have. The Curt hitch part # C14002 that you referenced won't fit the models of your truck that have a factory hitch so it would not work for you. Before you buy anything you need to check the owners manual of...
view full answer...
Higher Capacity Trailer Hitch Fit For 2014 Ford F-150 with Factory Hitch
The TorkLift Trailer hitch part # TLF1005H is a confirmed fit for your 2014 Ford F-150 that has a factory hitch and it has an 800 lb tongue weight/8,000 lb total weight capacity so it would fit and be a great option. Be sure not to exceed the weight capacity of the truck either with the extra capacity of this hitch. In the owners manual your total towing capacity will be listed.
view full answer...

< Previous

Next >

Do you have a question about this Trailer Hitch?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Jameson C

Expert Research:

Adam R

Video Edited:

Dustin K

Updated by:

Wilson B

Updated by:

Michael B

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.