What is The Length and Height Of The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227?

Question

Question:

I gather it weighs about 30 lbs but am wondering the actual length? Am hoping i can pack one inside my suitcase or carry onto an upcoming flight to Canada? Thanks

asked by: Lorne R

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227 does weigh 30lbs. The widest point on the receiver is 40-1/4" and it has an overall height of 13-1/4".

expert reply by: Bud M

0

Answer 1

For a wider range of compatibility of accessories and greater overall stability, I recommend going with a 2" Class III hitch on your 2015 Subaru Outback. If you want a hitch with an easier installation, I recommend Curt Trailer Hitch Receiver -…

view full answer...

Answer 2

We do indeed have a nice selection of Class III trailer hitches available that are confirmed to fit your 2018 Subaru Outback Wagon. The primary difference between the hitch models is their physical appearance and how they will actually mount to the…

view full answer...

Answer 3

If a trailer hitch sticks out past the rear bumper of the vehicle it is installed on it you do run the risk of hitting your shin on it as you walk by. The good news is that the Draw Tite hitch part #76227 sits about flush with the rear bumper so that…

view full answer...

Answer 4

You are definitely on the right track with your research and findings. If your 2018 Subaru Outback Wagon is listed for 200 lbs TW then even if you use a trailer hitch with a higher TW capacity, like the Draw-Tite #76227 with a 600 lb TW, you are…

view full answer...

Answer 5

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

view full answer...

Answer 6

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

view full answer...

Answer 7

For your 2017 Subaru Outback, the Thule Camber 4-Bike Rack #TH9056 is a really nice option and will work perfectly with the Draw-Tite Max-Frame Trailer Hitch Receiver #76227. The reason for that is, when we installed this hitch on a 2017 Outback, we…

view full answer...

Answer 8

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 9

The EcoHitch Trailer Hitch #306-X7601 and Draw-Tite Trailer Hitch #76227 are very good choices for your 2019 Subaru Outback and would be my top options as well. The one thing EcoHitch normally has going for it is that is usually the only option for a…

view full answer...

Answer 10

For your 2018 Subaru Outback Wagon the Draw Tite hitch part #76227 is superior over all of the other hitches available. It has a 2 inch opening which is the most popular hitch size (more accessories are made to fit it), and has higher capacities at…

view full answer...

Answer 11

For your 2016 Subaru Outback I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76227. This style of hitch is going to provide the cleanest look because the cross bar sits behind the bumper which also allows for a bit more ground clearance…

view full answer...

Answer 12

The Curt hitch receiver item #C13410 and the Draw-Tite hitch receiver item #76227 are identical hitches in almost every way. They both have the same capacities and installation methods and are hard to identify once they're installed on a Subaru.…

view full answer...

What is The Length and Height Of The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227?

Continue Researching