Locking Plate Needed To Lock A Lippert Turning Point Into The Head Of A Demco Hijacker

Question

Question:

I bought a fifth wheel with the turning point pin box. I have a demco hijacker. I found how to lock out the turning point on your site. Which capture plates do I need? The ones I have aren’t even close. Thank you!

asked by: Danny S

0

Expert Reply:

To utilize your Demco Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550037 you'll just need the Demco Autoslide Locking Plate for Lippert Turning Point and 5th Airborne Pin Boxes # DM77GV. This will replace the factory wedge kit that came with your Turning Point and lock into the funnel of your hitch to prevent the king pin from pivoting in the jaws of the hitch.

expert reply by: Kevin C

0

Answer 1

Congrats on all your new toys! I do not think a Curt 5th wheel hitch, like item #C16120, is the best for your set up. You would need to purchase an adapter rail item #C88KR to use this hitch with your puck system. This adds weight, cost, and…

view full answer...

Answer 2

By themselves, the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550022 and the Curt Turning Point are not compatible together, however there is a way to get these two to work with each other. What you can do is lock out the Turning Point pin…

view full answer...

Answer 3

By themselves, the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550022 and the Curt Turning Point are not compatible together, however there is a way to get these two to work with each other. What you can do is lock out the Turning Point pin…

view full answer...

Answer 4

I reached out to my contact at Curt and he said the most common cause for the issue you're experiencing with the handle on your A16 5th Wheel Hitch #C16521 is that the handle mechanism (referred to as the "pawl" in the owner's…

view full answer...

Answer 5

I contacted RAS about whether the #RAS3611-SHD suspension kit will fit with the Air Lift air bags on your 2012 Ford F-250. They confirmed that the two parts may be able to be used together. You'll need to make sure, on your truck, that there is…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Charles, Yep, the Demco Autoslide 5th Wheel Trailer Hitch for Chevy/GMC - Single Jaw - Underbed #DM36SV is a kit that includes the Underbed Rail and Installation Kit #DM8551004 and the Demco Autoslide 5th Wheel Trailer Hitch #DM8550022. The…

view full answer...

Answer 11

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Locking Plate Needed To Lock A Lippert Turning Point Into The Head Of A Demco Hijacker

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching