How to Find Correct Replacement Amber Round Clarence Light for Forest River Wolf Pup Trailer

Question

Question:

I need a round amber replacement snap on lens for my 2018 Forest River Wolf Pup 18TO Black Label. The lens says, SAE AP2 16 DOT optronics. Ive looked and am not having any luck.

asked by: Jaime N

0

Expert Reply:

I do have some options for you but without a part number or measurements, it would be hard to nail down exactly which one you need. I know you found what you thought was the part number but that's not actually it, that is a DOT number. The part number would be on the base of the light which you would find with the cover removed. I have attached for you below a list of all our round lights with amber lens made by Optronics. I recommend measuring what you have and sorting the selection down even further with this info. If you find one that looks like yours, proceed to the product page and scroll down to look for replacement parts as that is where you would find the lens only if available.

The Optronics LED Clearance or Side Marker Trailer Light part # MCL0040ABB which measures 2-1/2" diameter looks close, we don't have the lens only for this so you would either need to buy the assembly and transfer over the lens or replace the entire light if it's a match.

expert reply by: Conner L

0

How to Find Correct Replacement Amber Round Clarence Light for Forest River Wolf Pup Trailer
(click to enlarge)

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…

view full answer...

How to Find Correct Replacement Amber Round Clarence Light for Forest River Wolf Pup Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching