Customers compare KE33JR to these similar products
Products Featured in this Video
Hi, everybody, Andy here with etrailer.com. Let's take a look together at this Kenda Karrier ST185/80R13 Load Range D Radial Trailer Tire with 13 inch aluminum wheel with a 5 on 4 1/2 inch bolt pattern. Now this tire and wheel assembly is gonna be great for your boat trailers, stock trailers, utility trailers, and campers. This special trailer tire, or ST tire, has sturdy sidewalls so… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 #LHLR103 or 9/16"-18 #LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not necessary and more so just…
view full answer...Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…
view full answer...Hey James, so while we don't have a picture of the #KE33JR exactly yet I attached a picture that shows what the wheel looks like in a different size to give you an idea as its most likely you wanted to just see the wheel design.
view full answer...Thanks for reaching out, Sam! The Kodiak Disc Brakes #KOD59FR with the Dacromet/KodaGuard are definitely a solid choice, but the hub-rotors and brackets only have a 300- to 400-hour salt spray rating and the calipers have a 500- to 600-hour salt…
view full answer...Hello Joe. The ST205/75D15 and ST185/80D13 are not the same at all. The typical ST205/75D15 tire like part #AM32424 is 8.1" wide, 27.3" in diameter and will fit 15" wheel. The typical ST185/80D13 like part #KE33JR is 7.2" wide,…
view full answer...Yes, the DeeMaxx Disc Brake Kit #DE66YR will allow you to use 14" trailer wheels.
view full answer...Although the Dexstar Steel Mini Mod Trailer Wheel #AM20315 has a e-coat primer and black powder coat finish, this is option is much more prone to rust over an aluminum or galvanized rim. The powder coat finish is mainly for common trailer use so it…
view full answer...EZ Lube spindles are generally preferred over Bearing Buddy setups. The EZ lube allows you to insert grease down the middle of the spindle easily which is basically the best option aside from removing the hub and taking it all apart and cleaning and…
view full answer...Your picture didn't make it through but it sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the…
view full answer...It is not usually necessary to change wheel studs when switching from stamped steel trailer wheels to machined aluminum wheels like the Lionshead #LHSJ211G but I went to our warehouse to measure the thickness of the material at this wheel's hub,…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...The Dutton-Lainson Rigid Mount Marine Jack #DL22507 has an inner diameter of 1 3/4", has an inner post length of 19" and and outer post length of 21 1/4". I've also included the dimensional drawing as well for you to check out.
view full answer...