Result: 171255tb

Sorry Jason I have no information on that part number H72827-54 either. We do have a replacement hose for what you mentioned. It is the MB Sturgis Propane Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 5' item #100383-60-MBS.

Nope. Your axle uses a different outer bearing and outer race than is included in the #BK2-100. There is no kit that includes all of the parts you need, but I have linked them all individually below: Inner Bearing #L68149 Inner Race #L68111 Outer…

Hello Dan, those a definitely some uncommon bearing sizes. It sounds like this trailer is pretty old and uses bearing sizes that are basically obsolete. We do have the Timken #TMK83VR bearing that has a 3/4" ID. This bearing is generally used on…

I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D, which will work with your current setup and are perfect because the Dacromet plating is designed to withstand…

Both Curt class III trailer hitch, part #13328 and the Draw-Tite Hitch class III trailer hitch, part #75599, are quality hitches. But the most popular hitch for your vehicle is the Curt hitch, part #13328. Installation is relatively easy, even for a…

Hey Mike, thanks for reaching out! I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal #TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end. I…

Thanks for the photo! In order to replace the surge brake actuator, I recommend taking a look at the Titan Zinc-Plated Brake Actuator part #T43397007K. This actuator is zinc plated for corrosion resistance, will work with 1-7/8"/ 2" hitch…

Thanks for all the details! To replace the breakaway cable that came on your Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you just need the Emergency Break Away Cable Repair Kit #DX64XR and you'll be good to go!

Yes we do offer just the inner member of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR with the Replacement Inner Member for Dexter DX7.5L Actuator #DX99FR.

The distance between the mounting holes of the Dexter coupler part #DX56FR is 3 inches so it would bolt right up to your trailer. For a manual lockout you could use with this you'd want part #DX94FR. Standard brake line kits like the part #DM5424…

For your 2020 Hyundai Santa Fe that's equipped with the factory tow package, the trailer wiring harness is the Curt T-Connector #CU94FR. This custom harness is going to plug right into that factory tow port beneath the vehicle, on the…

The Dutton Lainson Repair Kit part #DL70475 that you mentioned is a fit for the DL 1802A winch that you have. It will work for you to give you the replacement spring you need.