Replacement 10" Hub-and-Rotor Assembly for 2012 ShoreLand'r Boat Trailer
Updated 05/01/2023 | Published 04/30/2023
Question:
I have a 2012 shore lander boat trailer… went to replace bearings and saw that rotors are corroded… the attached picture has trailer specs and I have already purchased bearings and seals see attached pics. What replacement rotors do I need that will fit my trailer and the already purchased bearings and seals?
asked by: Richard S
Expert Reply:
Thank you for the information!
To replace your hub-and-rotor assembly I recommend using the Kodiak 10" Hub-and-Rotor Assembly # KHR10D which has the 5 on 4-1/2" bolt pattern you're needing as well as a Dacromet finish which is much more resistant to water corrosion than standard powder and zinc coatings.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: leaf springs
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: 27 inch long trailer leaf springs
- Search Results: marine grade trailer leaf springs
- Search Results: equalizer
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: How to Determine Correct Replacement Hub for Boat Trailer
- Q&A: Recommended Stainless Steel Lug Nuts For A Shorelandr Boat Trailer
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: Correct Replacement Leaf Springs for Trailer with Dexter 3,500 Lb Axle
- Search Results: disc brake hub
- Search Results: trailer hubs and drums
- Q&A: Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
- Q&A: How to Determine Correct Disc Brake Hub & Rotor Kit For Boat Trailer
- Video: What to Know About the Replacement Guide Bolt for Kodiak Calipers
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Detailed Breakdown of the Metal Loom Clamp
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Video: Replacement Mounting Bracket for Kodiak Disc Brake Caliper Spec Review
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
on Trailer Hubs and Drums
