Replacement Trailer Brake Kit and Hub Parts For a 2014 Forest River Grey Wolf 26DBH
Updated 12/12/2022 | Published 12/11/2022 >
Products Featured in This Question
Question:
I need to get new brake asm for my 2014 Grey Wolf 26dbh and I am not sure what I need to buy. I know I need one for each side but cant figure out the part numbers. Can you help?
asked by: Troy L
Expert Reply:
Your 2014 Forest River Grey Wolf 26DBH was manufactured with 3,500lb tandem axles. These will have most likely came with a 10" standard brake kit like the etrailer # AKEBRK-35. These require manual adjustment every 3,000miles. We also have the Self-Adjusting # AKEBRK-35-SA brake kit which will adjust the brakes as they wear. This will give you the most consistent brake feel throughout the life of the brakes.
We do have the Bearing Kit # BK2-100 which you can use to rebuild the hubs. This is often a good idea as you will already have them off for replacing the brakes. We also have the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K which will allow you to replace your drums if they are worn past the manufacturer specification or damaged in another way.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: axle hub
- Q&A: What Do I Need To Repack Bearings On A 2017 Jayco Jay Feather 16XRB
- Q&A: How to Find Replacement Bearings and Grease Seal for 1990's Shoreline Boat Trailer
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: wheel center caps
- Search Results: axel
- Search Results: bumper cap
- Search Results: axel nut
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Looking For Trailer Brakes And Hubs For Dexter RT 3,500 lb Axle
- Q&A: Replacement Brakes And Hubs For A 3,500 Pound Lippert Hub 126003
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Highest Capacity Electric Brakes for a 4 Bolt Brake Mounting Flange
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Will etrailer Electric Brakes AKEBRK-35 Fit 2016 Jayco Jay Flight 24RBS?

