Replacement U-Bolt Kit For Blue Ox SwayPro Weight Distribution

Question

Question:

We need that u shaped gizmo that has two bolts on it that connects with chains on our sway bars. Looks like the sway pro...

asked by: Donna H

0

Expert Reply:

The correct replacement U-bolt kit for the Blue Ox SwayPro weight distribution system is the following:

- Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars # BLU48FR

expert reply by: Kyle S

0

Answer 1

I went out to the warehouse and measured the U-bolt, part #3371302360. It's a course thread 3/8-16 bolt that measures about 1-15/16 inches long and has about a 1/2 inch opening. If there are other measurements you need let me know what you're…

view full answer...

Answer 2

Yes, the u-bolts from the Reese Replacement Chain Kit #55630 are the same size as the Reese Replacement Weight Distribution Chain Kit #3216. Both of the u-bolt sizes are 3/8 inch.

view full answer...

Answer 3

Hey Mike, thanks for reaching out! You're looking at 1" between the centers of the U-Bolt included in the Reese Replacement Chain Kit for Uplift Bracket #55630. Please note that this kit is a direct replacement for Reese Heavy Duty Round Bar…

view full answer...

Answer 4

The hardware and U-bolts are grade 5 for the Blue Ox kit: - Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars #BLU48FR

view full answer...

Answer 5

I recommend using the Replacement U-Bolts for Reese or Pro-Series Weight Distribution Spring Bar Lift Chains #RP58032. This will ensure that you do not have any fit issues with the Reese Dual Cam High Performance Sway Control. The Replacement U-Bolt…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement U-Bolt Kit For Blue Ox SwayPro Weight Distribution

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching