Does Hidden Hitch for 2022 Ford Mustang Mach-E Need 4-Way Mounting Bracket

Question

Question:

Do I need to buy the mounting bracket for the 4 pole flat?

asked by: Romeo

0

Expert Reply:

Yes, you would want to use a 4-way mounting bracket like the part # 18144 with the Hidden Hitch part # DT72GR to mount the 4-way of the Curt harness part # C59236 that is a fit for your 2022 Ford Mustang Mach-E. The hitch comes with a bracket for the mounting bracket to attach to as well.

expert reply by: Jameson C

0

Answer 1

I would be happy to help you find a hitch for your 2022 Ford Mustang Mach-E. I absolutely recommend the Hidden Hitch by Draw-Tite Trailer Hitch Receiver item #DT72GR over the Curt item #C77ER. It is definitely worth the extra money. The receiver is…

view full answer...

Answer 2

Hey Jean congrats on the new Mustang! For a hitch, I'd suggest going with the EcoHitch Class 3 Trailer Hitch #EH66SR. EcoHitch makes a really good product, so I have zero doubts it'll work great for you. This hitch also has a 2"…

view full answer...

Answer 3

As we haven't had the chance to install either the Curt #C77ER or the Draw-Tite #DT92MR on a 2021 Mustang Mach-E, I went out and measured from the center of the first bolt hole to the end of the receiver opening on both hitches. The Curt will sit…

view full answer...

Answer 4

That's a good question, and there is one option I do like better for your 2021 Ford Mustang Mach-E between the Curt #C77ER and Draw-Tite #DT72GR hitches, and that's the hitch from Curt, which is the following part number: - Curt Trailer Hitch…

view full answer...

Answer 5

I would be happy to compare those two hitches for you but there is little to no technical information available about the Stealthhitch because it does not release until the end of August 2022. Out of the two I would highly recommend the Draw-Tite…

view full answer...

Answer 6

The 2' x 2" receiver portion of the Hidden Hitch by Draw-Tite item #DT72GR has a 5" depth before you get to the weld. This is from the opening of the receiver to the farthest point on the inside. This hitch is a confirmed fit for the…

view full answer...

Answer 7

I can't say for sure since it hasn't been tested and we don't have one around to try it out. It would also depend on the actual bikes and bike rack you have. I imagine that as convenient as it may seem it is probably a horrible pain to…

view full answer...

Answer 8

The Curt Class III trailer hitch #C13119 does have a 350-lb tongue weight (TW) rating as you noted, and that capacity must be enough for the weight of the bike rack itself plus that of your loaded bikes. A substantial 4-bike rack like the Hollywood…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C77ER does protrude from the bumper. I spoke to a contact at Curt and he did not have the length the receiver came out from the bumper. We measured the hitch and from the first mounting hole to edge of the receiver is…

view full answer...

Answer 10

That is a great question, and yes, the 200 lb TW rating is accurate. The Curt #C77ER is "technically" a class 3 hitch because it has a 2" receiver. The 200 lb TW rating and 2,000 lb towing weight is generally what you see on a class 1…

view full answer...

Answer 11

Hey Paul, thanks for reaching out! The EcoHitch Hidden Trailer Hitch Receiver #EH66SR that fits your 2024 Ford Mustang Mach-E weighs about 41-1/2 lbs.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does Hidden Hitch for 2022 Ford Mustang Mach-E Need 4-Way Mounting Bracket

Products Featured in This Question

Continue Researching