Which Progressive Dynamics Remote Pendent for PD9140A

Question

Question:

I have a PD9140A, Is this already a smart charter setup? What pendant do I need?

asked by: Chris

0

Expert Reply:

The PD9140A is a converter that has the smart charger setup built into it so the correct pendent would be the part # PD92201.

expert reply by: Jameson C

0

Answer 1

Hello Rob. The best option for a 30 amp lithium compatible converter is the Progressive Dynamics 9300 Series RV Converter Charger #PD49RR. I do have to caution against cutting off the plug since this will void your warranty. If you are comfortable…

view full answer...

Answer 2

The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge coming from…

view full answer...

Answer 3

While we have no way of knowing what converter is in a Dutchmen Adirondack trailer, you can use the following: - Progressive Dynamics 9300 Series RV Converter Charger #PD49RR

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hello Richard, Congratulations on the KZ Confluence 18RB! That is a really nice camper, and I like that KZ packed quite a bit into an 18-foot floorplan while still giving you a slide for some extra room inside. Yes, installing the etrailer RV…

view full answer...

Answer 6

Hi LaRue! The etrailer RV Slide-Out Topper #e67QV does include the awning rail track. This is everything you need for a complete slide-out topper installation. If you already have Solera mounting brackets installed from the factory, you will also…

view full answer...

Answer 7

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

view full answer...

Answer 8

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

view full answer...

Answer 9

Hi Gary, I completely understand wanting to be certain before making the switch to lithium. Yes, I can confirm that the Progressive Dynamics 9300 Series RV Converter Charger, Part #PD79RR, is compatible with LiFePO4 batteries, including the LiTime…

view full answer...

Answer 10

Hey Christina, the Progressive Dynamics PD9360 is our part number #PD79RR and it is a 60 amp converter. The last two digits of the part number are the amp rating for these converters. A 60 amp converter would work well to keep two 100 amp hour…

view full answer...

Answer 11

Hey Steve, yes the Progressive Dynamics 9300 Series RV Converter Charger #PD69RR that you referenced would be the correct converter to replace your current PD9140A with. This is a 45 amp converter which is a little higher than what you have now but…

view full answer...

Answer 12

Hey Jay, the correct replacement converter to replace what you have now that is compatible with LifePO4 batteries would be the part #PD69RR that you referenced. Progressive Dynamics likes to change their part numbers a lot and create revisions of…

view full answer...

Which Progressive Dynamics Remote Pendent for PD9140A

Product Page this Question was Asked From

Continue Researching