Recommended Suspension Enhancement For A 2021 Jeep Grand Cherokee L

Question

Question:

Do you have any suspension upgrades for a 2021 Jeep Grand Cherokee L??

asked by: Edgar

0

Expert Reply:

Yes, we do!

Take a look at the:

-Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL62WQ.

These springs have a maximum load leveling capacity of up to 1,000-lbs, an adjustable air pressure range of 5 to 35-PSI, and will diminish sway and absorb road shock to improve stability and ride quality.

expert reply by: Bryce D

0

Answer 1

Hey Bruce, the correct install harness for the Redarc Tow Pro Liberty part #RED52VR in your 2025 Jeep Grand Cherokee with the factory tow package would be the part #RED77FR which does plug right into the port you found under your lower left panel.…

view full answer...

Answer 2

Hi Jerry; you want to hook up your trailer to your 2023 Grand Cherokee L first and then add air to the #AL62WQ.

view full answer...

Answer 3

You will need the Stop Light Switch Kit #RM-751449 for your 2019 Jeep Grand Cherokee. This will provide you with a brake signal as the factory brake switch wiring is very thin and not recommended for splicing into. This switch includes a custom fit…

view full answer...

Answer 4

Hey Dale! Sorry to say but they stopped putting the brake controller adapter plugs in the Jeep Grand Cherokees a few years back. 2020 was the last model year they included them. The Curt Echo item #C51180 is going to be the only plug and play option.…

view full answer...

Answer 5

Hey Willem, thanks for reaching out! To install the Redarc Tow-Pro Liberty Brake Controller #RED52VR to the factory tow package plug on your 2021 Jeep Grand Cherokee you need the Tekonsha Plug-In Wiring Adapter #TK93VR as well as the Wiring Adapter…

view full answer...

Answer 6

Hi Jeremy; is this a 2021 Jeep Grand Cherokee or Grand Cherokee L? You have the L in our fitguide so I'm not sure. Either way, without the factory tow package you will need to install a 4-way and then a universal 7-way. There are no plug and play…

view full answer...

Answer 7

Hey Will, we have what you need to install the Redarc Tow Pro Liberty part #RED52VR in your 2021 Jeep Grand Cherokee but you will need to use the Curt harness part #C51446 instead as the Tekonsha one you mentioned is unavailable at this time. You…

view full answer...

Answer 8

We can definitely hook you up with everything you need for your 2024 Jeep Grand Cherokee. There will be two wiring kits needed, #C27BR and #ETBC7. This will give you both the 7-way and 4-flat on the back of the Jeep, as well as all of the necessary…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Suspension Enhancement For A 2021 Jeep Grand Cherokee L

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching