Where to Get Brake Signal For Installing Trailer Brake Controller On a 2019 Jeep Grand Cherokee?

Question

Question:

Find brake light wire to add brake controller for 2019 Jeep Grand Cherokee limited 4x4 without factory tow.

asked by: Dominic

0

Expert Reply:

You will need the Stop Light Switch Kit # RM-751449 for your 2019 Jeep Grand Cherokee. This will provide you with a brake signal as the factory brake switch wiring is very thin and not recommended for splicing into. This switch includes a custom fit mounting bracket for attaching to your Jeep.

I recommend the Redarc Tow-Pro Liberty Brake Controller # RED52VR which will include the universal wiring for connecting on your Jeep. This brake controller uses a small control knob and hides the large portion of the unit hidden behind the dash.

expert reply by: Bud M

0

Answer 1

I do have an option for you but there isn't a traditional stop light switch circuit on a 2023 Jeep Grand Cherokee L. Therefore, if you want to use a wired trailer brake controller you'd need a stop light switch like the RoadMaster Stop Light…

view full answer...

Answer 2

Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…

view full answer...

Answer 3

The Curt Echo Under-Dash Bluetooth Brake Controller #C27JR will provide you with one of the easiest installations as the Pigtail #C51446 will connect it to your factory wiring. And unlike other controllers there is no dash mounted controller or knob…

view full answer...

Answer 4

Good question; so the issue with your 2019 Jeep Grand Cherokee is that it doesn't technically have a traditional stop light switch, which is why you are having trouble getting 12 volts. The good news is the Stay-IN-Play DUO Supplemental Braking…

view full answer...

Answer 5

When you are hardwiring a trailer brake controller like the Prodigy P2 #90885 the red wire connection that provides the triggering signal to the controller should be made to the wire on the COLD SIDE of the brake light switch circuit. This is the…

view full answer...

Answer 6

The #20273 brake controller wiring adapter you referenced is compatible with the 2010-2012 Dodge Ram, but because it lacks the diode in the stop lamp switch circuit, it won't work on your truck. You'll need the #3024-P wiring adapter which is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Where to Get Brake Signal For Installing Trailer Brake Controller On a 2019 Jeep Grand Cherokee?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching