Will Air Lift Coil Springs Fit 2018 Toyota Sequoia with ReadyLIFT 2/3 Lift Kit

Updated 10/24/2022 | Published 10/23/2022

Products Featured in This Question

Air Lift 1000 Air Helper Springs for Coil Springs - Rear

(1187)

$130.66

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(140)

$16.57

Timbren Rear Suspension Enhancement System

(6322)

$269.36

Question:

Will these still work on my 2018 Sequoia SR5 with a ReadyLift 2/3 kit installed?

asked by: Paul

Expert Reply:

From what I'm seeing the ReadyLIFT 2/3 kit increases the distance between where the ends of the Air Lift 1000 Air Helper Springs for Coil Springs # AL60826 air bags would be making contact on your 2018 Toyota Sequoia so these are not compatible with each other.

An alternative solution would be the Timbren Rear Suspension Enhancement System # TTORSEQ1 which replaces the factory bump stops with Aeon rubber springs to help provide more cushion. When install this kit you want a 1/2" to 1-1/2" gap between the rubber spring and the contact point. The rubber spring measures about 3-1/4" high so if you measure from the mounting point down to the contact point you can see how many of the 1" Spacer # A25723-90AH00 you'll need for the kit to properly interact with your vehicle. Please note you will need to acquire new hardware when you start adding spacers.

Attached are some videos for you to check out.

expert reply by: Jon G