bing tracking image
  1. Vehicle Suspension
  2. Timbren
  3. Bump Stops
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Extra Heavy Duty
THIS ITEM IS NOT A FIT FOR
2006 Cadillac Escalade
Special Savings on Select Timbren Items. See Cart for Savings.
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Timbren

Timbren Rear Suspension Enhancement System

Part Number: TTORSEQ1
In Stock
$269.36
Retail:$316.90
You Save: $47.54
Vehicle Suspension
Not Confirmed to Fit

2006 Cadillac Escalade

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use. Great Prices for the best vehicle suspension from Timbren. Timbren Rear Suspension Enhancement System part number TTORSEQ1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7324)
  • Q & A (0)
  • Photos

Timbren Vehicle Suspension - TTORSEQ1

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 6,000-lb Load Support: Keeps your vehicle level and stable when towing or hauling heavy gear.
  • Smoother, Safer Ride: Absorbs road shock and reduces body roll for better control on rough roads.
  • Zero Maintenance Needed: No air lines or parts to adjust—rubber springs work automatically under load.
  • Protects Factory Suspension: Takes the brunt of bumps to reduce wear and extend suspension life.
  • Easy Bolt-On Install: Mounts in place of factory bump stops with no drilling required.

Features to know about

Keep Your Ride Level Under Heavy Loads: 6,000-lb Rear Suspension Support

Heavy gear in the back or a loaded trailer can make your rear end sag and throw off steering and braking. The Timbren Rear Suspension Enhancement System adds up to 6,000 lbs of extra support right above the axle. The hollow rubber springs sit between the frame and axle to keep things level, reduce squat, and help your suspension handle the weight without bottoming out. No drilling or air lines—just bolt them on where the factory bump stops used to be and go.

Truck bed loaded with heavy cargo showing rear axle sag before installing Timbren Rear Suspension Enhancement System

Animation showing compression of Timbren hollow rubber spring demonstrating progressive resistance design

Diagram of Timbren hollow rubber spring installed above rear axle showing loaded versus unloaded clearance

Smooth Out the Rough Stuff: Rubber Springs That Absorb Shock

When the road gets rough, these hollow rubber springs take the hit so your factory suspension doesn’t have to. They act like built-in shock absorbers, soaking up bumps and vibration from uneven pavement or gravel roads. That means a smoother ride when loaded and less wear on your stock suspension over time.

Unloaded truck driving on bumpy road showing lack of shock absorption before adding Timbren suspension springs

Stay Stable Through Turns and Crosswinds: Independent Spring Action

Each spring works on its own, so when one side of your vehicle sags or leans in a turn, only that side engages. This independent action cuts down on body roll, helps control sway, and keeps your setup feeling planted when you’re cornering, swerving, or dealing with off-center loads. You’ll feel more confident behind the wheel—especially when a gust of wind or passing semi tries to push you around.

Timbren suspension system preventing vehicle body roll, sway, and squat during cornering and uneven loads

Vehicle towing trailer experiencing sway before installation of Timbren Rear Suspension Enhancement System

Easy Setup That Lasts: Simple Bolt-On Design and Lifetime Warranty

Installing this system is straightforward with vehicle-specific brackets and hardware included. There’s no need for compressors, air hoses, or ongoing maintenance. Once bolted into place, the rubber springs do their job automatically—firming up under load and staying quiet when unloaded. Built to last without drying out or cracking under normal use, they’re backed by a limited lifetime warranty for long-term peace of mind.

Specs

Included Components

  • Includes: 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
  • Replaces: factory bump stops on frame

Installation

  • Drilling Required: No drilling required

Weight and Capacity

  • Capacity: 6,000 lbs

Compatibility

  • Designed to work with: a suspension system that is in good working order

Warranty

  • Limited lifetime warranty: satisfaction guarantee

TORSEQ1 - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TTORSEQ1 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.7

7324 reviews
5 Stars
(5895)
4 Stars
(887)
3 Stars
(208)
2 Stars
(136)
1 Star
(198)
Review Sort Icon
by:
The purchase and shipping were smooth. The Timbren SES does exactly what I needed in stopping the few inches of squat with a Velocirax 7 slot bike rack or loading the tongue while towing. The install was slightly different than many videos, but was not difficult. This was definitely worth the price.
by:
2016 Toyota Sequoia
Good fit. Works as advertised.
by:
2016 Toyota Sequoia
Made a huge difference on gen 2 sequoia towing about 5500lb box trailer.
by:
2008 Toyota Sequoia
I first found e-trailer last year when I was up north and needed some new trailer tires fast. Communication and shipping were excellent! I would definitely go back and use them again.
by:
2017 Toyota Sequoia
I installed over the weekend and have a maiden journey with the Travel Trailer coming up next week. Installation on my 2017 Toyota Sequoia was straight forward. I was going to say easy, but I am not as young as before and my wheel / tire combo is damn heavy for an older guy. But that's another story. Anyway, just remember folks, this does not increase the payload of your vehicle. You must still use WDH and sway control for longer/heavier trailers.
Cameron profile picture

Cameron

6/27/2024

Product works great. For very short trips, or when you want to disconnect your WDH for better maneuverability for those tight corners, the sag with the trailer connected is minimal as the Timbrens pick up the load. Under everyday driving, they are not engaged so stock ride quality is not compromised. Have seen people post issues in online forums about air bag problems which is why I went with Timbrens. Set it and forget it - maintenance free. I made the right choice. I am in no way affiliated with etrailer or timbren.

by:
For 2010 Toyota Sequoia Limited. We installed these, AND we also installed Firestone airbags, now we are able to tow our 25' Airstream well!
Thomas profile picture

Thomas

10/14/2022

2010 Toyota Sequoia- Timbrens helped with leveling and towing our 25 foot Airstream. However, we still needed Firestone Airbags. No problem with the Timbrens.

by:
2018 Toyota Sequoia
Product arrived when expected.
Installation was simple for the 2018 Sequoia, did not even need to remove the rear wheels.
I achieved what I needed which was to raise the back of the truck about an when loaded. Ride feel normal under load and seems to have less lean during turns in the back.
by:
Toyota Sequoia
This was very easy to install. It does require removing the wheel to install them but that is the most difficult part of the install so it's a 1 banana job. As far as function they work as advertised. I used these to tow a 5500 lb trailer. Also had a Thule box on top of the Sequoia and 4 passengers. There was a little sag (rear lower than the front) while towing but not bad maybe an inch or less. Going over bumps felt controlled with no harshness. I have used air bags on other vehicles. Although they allow more control of the ride height I don't like having to spend several hundred for an in cab controller or fiddling with adjusting the air frequently. These are a good compromise for me and did a fine job.
by:
Great communication and shipping was quicker than expected. I love etrailer. Always accurate with their descriptions.
Pratana profile picture

Pratana

8/8/2022

After a year. Timbren has held up excellent. I tow a 30ft travel trailer with about 7200lbs and completely eliminates the sag along with an E2 WDH. I definitely recommend this product

by:
2008 Toyota Sequoia
2008 Sequoia, these are great but only one inch longer than the OEM bump stops. Not sue if there is one that is longer. The independent suspension on these SUV's have the bump stop at an angle too, so I'm curious to see how effective they are. Gave them 5 stars though because the product is amazing technology.

For the 08 Sequoia, its a 14mm offset box end wrench to remove. Clean off the top of the exposed bolt if they are old like mine and some PB blaster a couple days before helps. You'll need to push the OEM bump stop against the frame as it loosens to keep it from spinning with the nut. New ones are a 17mm so you'll need a 17mm offset box end wrench up top and a deep 17mm socket inside to reach. Shove some shop towel pieces into your 17mm socket to keep the bolt from falling in. I removed the tires for easier access.

My boat gives me about 500 lbs. of tongue weight so I get about 1.75 inches of sag and that's with the Firestone in coil air bags. I was trying to reduce my sag to 1 inch. Not sure these will help with that. If you are starting from scratch, I'd recommend the Airlift HD bags. I can only run about 30-35 max psi in my bags but with the Airlift bags, you can get up to 50 psi easily. I'd go that route, upgrade to a stiffer spring and use these new bump stops as security.

My 08 has 230k so next summer I'll probably take my own advice on better bags and new springs.
by:
2014 Toyota Sequoia
I purchased the Timbrens for my 2014 Toyota Sequoia Limited without the automatic leveling suspension option. I completed the installation without having to remove the wheel by jacking up the vehicle high enough to access the top mounting bolt of the factory part. As advertised, the clearance was about 1 to 1.5 inches. They went on without an issue and have not tested them with my boat trailer as of yet. I am positive that the Timbrens are going to alleviate about 3 - 4 inches of the vehicle sag that I was experiencing with the trailer. I will follow-up with pictures at a later time.
by:
2008 Toyota Sequoia
I have a 2008 Toyota Sequoia with independent rear suspension. I had a lot of “squat” when hauling the boat and car trailer. These made a significant improvement helping with the ride and tire wear. Highly recommend and super easy to install. Etrailer shipped these fast!
by:
2008 Toyota Sequoia
Like others have said, very easy install. Yes you do need to take the tire/wheel(s) off in order to have good access. Have not driven with trailer hooked up yet, that's next weekend. With a car on the trailer I noticed a big sag in the rear suspension, am hoping this will fix that problem. Have only driven around local streets and so far I don't notice any difference in the ride. Some comments indicated a stiffer ride, maybe after I've put a lot more miles on the car with these installed I may find the difference.
by:
2012 Toyota Sequoia
These were extremely easy to install, hardest part was getting the old fasteners off (as usual). Taken together with my Weight Distributing Hitch, these really take the lean out of my 2012 Sequoia when it is pulling my 7600 lb travel trailer. Great product!
by:
I have greater contol and vehicle stability pulling my camper since installing these Timbrens. Great product. Won’t pull a camper without them.
by:
Easy to install and functions as advertised. My truck handles off-road bumps much better.
by:
Awesome! Tammie was great. Super knowledgeable, and the kind of person that truly cares about why you called and WANTS to help with a solution! She not only helped with the initial call, but also sent a follow-up email to make sure I got my product. As for the product, I can’t wait to install it.
by:
2017 Toyota Sequoia
Fast delivery, simple installation on my 2017 Sequoia and perform as advertised.
by:
2010 Toyota Sequoia
easy to install
by:
2013 Toyota Sequoia
Great description
by:
2019 Toyota Sequoia
by:
by:
by:
by:
2013 Toyota Sequoia
25
7324
true
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • Suspension Enhancement Recommendation for 2008 Toyota Sequoia Towing Trailer
    The Timbren kit part # TTORSEQ1 that you referenced is the correct fit for your 2008 Toyota Sequoia and would give you additional suspension support when towing. That said I wouldn't necessarily recommend this kit unless you were planning to be towing most of the time as it would make the ride quality a bit harsher when not towing. The better option if you are concerned about ride quality is the part # F4164 which allows you to use varying air pressure in the bag so that you can tailor...
    view full answer...
  • Can Timbren Kit # TTORSEQ1 be Used on Lifted Vehicle
    Hey Matthew, yes the Timbren kit part # TTORSEQ1 that you referenced would work great on a vehicle that is lifted but you have to use spacers to take up that extra space created like with the part # T68MR. How big of a lift does your vehicle have?
    view full answer...
  • Will Air Lift Coil Springs Fit 2018 Toyota Sequoia with ReadyLIFT 2/3 Lift Kit
    From what I'm seeing the ReadyLIFT 2/3 kit increases the distance between where the ends of the Air Lift 1000 Air Helper Springs for Coil Springs # AL60826 air bags would be making contact on your 2018 Toyota Sequoia so these are not compatible with each other. An alternative solution would be the Timbren Rear Suspension Enhancement System # TTORSEQ1 which replaces the factory bump stops with Aeon rubber springs to help provide more cushion. When install this kit you want a 1/2" to 1-1/2"...
    view full answer...
  • Recommended Suspension Enhancement for 2014 Toyota Sequoia Platinum
    Your 2014 Toyota Sequoia Platinum does not require suspension enhancement if you are comfortable with the ride with your trailer connected in any of the 3 factory modes. The Timbren Rear Suspension Enhancement System # TTORSEQ1 are the correct fit if you want to add suspension enhancement which will take the brunt of the additional weight when towing to reduce wear on your factory suspension. These springs are designed to increase in rigidity and support as more weight is added working...
    view full answer...
  • Comparing Suspension Enhancement Colors for 2013 Toyota Sequoia
    The Air Lift and Firestone Coil-Style air springs that fit your 2013 Toyota Sequoia are different colors so that they do stand out actually. Coil-style springs install inside your coil suspension so they are a bit more hidden while standard air bags install above the axle so they are seen a bit easier. If you want suspension enhancement that is a black color then I recommend the Timbren kit # TTORSEQ1. This simply replaces the factory bump stops on your vehicle so your suspension gets...
    view full answer...
  • Does 2008 Toyota Sequoia Need Suspension Support When Towing Trailer
    The suspension of your 2008 Toyota Sequoia is soft enough that you'll experience some sag as you are towing the trailer you mentioned. Suspension enhancement like the Timbren kit part # TTORSEQ1 would be a really great idea to reduce this and give you a more stable towing experience so I would recommend it for you.
    view full answer...
  • Timbren Suspension Enhancement on a 2011 Toyota 4X4 Sequoia
    The description does mention an axle, but the principle is the same. Basically, right next to the rear coil springs on the 2011 Toyota Sequoia, there is a factory bump stop. You will remove the factory bump stop and install the Timbren system, # TTORSEQ1 in its place. That is the extent of the installation. I have included a link to our FAQ article on Timbren systems for you.
    view full answer...
  • Will Timbren Suspension Enhancement Raise 2008 Toyota Sequoia
    Your 2008 Toyota Sequoia will not be raised at all when you install the Timbren system that fits, which is the following part number: - Timbren Rear Suspension Enhancement System # TTORSEQ1 When installed, the # TTORSEQ1 will have a gap between the spring and contact point, and will only engage when you have a load in the vehicle that causes you to sag. That will just help you level out but will definitely not raise your Sequoia.
    view full answer...
  • Suspension Enhancement for 2014 Toyota Sequoia with Rear End Sag
    Yes. The Timbren Rear Suspension Enhancement # TTORSEQ1 is designed to help combat sag when your vehicle is unloaded or loaded and will help lengthen the life of your existing suspension (although if you're currently experiencing sag, that's usually a sign to look into replacing your shocks and possibly coil springs). The Timbren SES offers a no-drill installation for the easiest to install suspension enhancement we have available. I've linked one of our review videos about the Timbren...
    view full answer...
  • Durability and Warranty for Timbren Suspension Enhancement on a 2008 Toyota Sequoia
    I would be happy to help you. The Timbren Rear Suspension Enhancement System item # TTORSEQ1 is a confirmed fit for your 2008 Toyota Sequoia. I spoke to my rep at Timbren and they told me the answer to your question depends on how you use them but they will not dry out, harden, or crack. They have had customers need to replace them within a year but those have been on heavy duty service vehicles that get a lot of wear and tear. They typically will last past 10 years. I pulled some information...
    view full answer...
  • Recommended Suspension Enhancement for 2008 Toyota Sequoia with Integrated Auto Leveling System
    For your 2008 Toyota Sequoia with auto leveling system, the air spring kits will not fit because they require the same location as your auto leveling system. I do however have a solution to help you with the load when adding the bumper and winch and that is the Timbren Rear Suspension Enhancement System # TTORSEQ1. This system will not interfere with your auto leveling, but will replace your factory bump stops. They simply are mounted to the bump stop location and will provide additional...
    view full answer...
  • Timbren Suspension Enhancement for 2010 Toyota Sequoia Limited
    The Timbren suspension enhancement part # TTORSEQ1 that you referenced is a fit for your 2010 Toyota Sequoia and will help level your suspension when towing but you should note that these do not increase the towing capacity of your vehicle. You should check your owners manual to determine if you have the capacity for your trailer and be sure not to exceed this figure.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Lincoln B
Updated by:
Lincoln B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Installed by:
Robert C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924