Best Way to Reduce Squat On a 2022 Ford Bronco While Trailer Towing an RV Camper

Question

Question:

My bronco has rear coils and I dont see where this can be installed as they are lines running in the frame area where this can be installed. Please advise. I need to purchase something that minimize the zag when towing my rv. Thank you

asked by: Alejandro G

0

Expert Reply:

I have a recommendation for you if you are unable to mount the SumoSprings # SS56EV. The Equal-i-zer Weight Distribution System # EQ37060ET is the best way to reduce sag on your 2022 Ford Bronco while trailer towing. This particular system is rated for trailers up to 6,000lbs with a tongue weight of 200-600lbs. It will reduce sag by distributing the weight across your Bronco allowing you to level it. It also has sway resistance that will help keep your trailer tracking straight and will not get pushed around from strong winds or gusts from large trucks. You will need a 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the included 2" hitch ball. We also have a 2-5/16" Ball # EQ91-00-6100 if your travel trailer has the larger coupler.

If you can send me some images of the wires on the frame of your Bronco I can help you determine if the SumoSprings will be able to still be used.

expert reply by: Bud M

0

Answer 1

I recommend the SumoSprings Custom Helper Springs #SS36EV for your 2024 Ford Bronco because they have the higher 1,500 lb weight rating. The greatest thing about the SumoSprings though is they don't engage until it's needed so you just get…

view full answer...

Answer 2

The best SumoSprings for your 2023 Ford Bronco depends on what you are using them for - just to improve your ride a bit on rougher roads, or to help with sag when you are towing or maybe using an accessory. I'll go ahead and list out the options…

view full answer...

Answer 3

Hey Chris! SumoSprings typically recommends a 1/2" - 1" gap between the helper springs and the point of contact. The larger the gap the longer it takes for the springs to engage and vice versa. The 1/2" spacers that come with the…

view full answer...

Answer 4

We do indeed have SumoSprings for your 2024 Ford Bronco. For you I recommend the SumoSprings Custom Helper Springs #SS56EV. These are the 1,000 lb capacity urethane springs. These will help to support your rear suspension while you are towing. So for…

view full answer...

Answer 5

Hey Mike, thanks for reaching out! The max tongue weight is determined by the lower number in any given situation. Since your 2024 Ford Bronco has a max tongue weight rating of 350 lbs that will be the limiting factor, even if you use the Blue Ox…

view full answer...

Answer 6

Hey Curtis! The Blue Ox Trailer Hitch item #BLU95UR has a 4,500 lbs towing capacity. This hitch has been confirmed to fit the 2025 Ford Bronco and probably has the easiest installation method I've ever seen. The included hardware bolts quickly to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Best Way to Reduce Squat On a 2022 Ford Bronco While Trailer Towing an RV Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching