Replacement Brake Pads for 2005 Airstream Classic
Updated 08/06/2025 | Published 10/11/2022 >
Products Featured in This Question
Question:
Wat pads do i need for my 2005 airstream classic 30 feet long Trailer is disc brake Thanks
asked by: Heetkamp
Helpful Expert Reply:
In order to determine which brake pads you need for your 2005 Airstream Classic you will need to find the disc brake brand as well as your axle capacity. For example, if you have Kodiak disc brakes with 3,500-6,000 lb axles you can use the # K225CPSS. If you have 7,000-8,000 lb axles you can use the # K250CP-SS.
For Dexter brakes you can use the # K225CP if you have a 3,500 lb axle. For 6,000-8,000 lb axles you would need the # K71-629. If you have a different brand or capacity you will need to match it up with the corresponding brake pad replacement.
I have attached a link to all of our replacement brake pads for your reference.
Product Page this Question was Asked From
Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Brake Pads
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: stake pockets
- Search Results: 2 5/16 coupler
- Search Results: kodiak
- Search Results: fulton f2
- Search Results: f2 winch
- Search Results: fulton f2 winch
- Shop: Trailer Weld-on Stake Pocket - 7 Gauge
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Shop: Trailer Wiring
- Shop: Dexter Semi-Metallic Disc Brake Pads - 6,000 lbs to 8,000 lbs
- Video: Complete Breakdown of the Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate
- Shop: A-Frame Coupler with Oily Finish - 2-5/16" Ball - 14,000 lbs
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Shop: 20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Video: Breaking Down the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Q&A: Determining Replacement Bearings, Races and Seals for Dual Axle Tricker Trailer
- Video: U-Bolt Plate for 2" Square Axle: The Breakdown
- Video: All About the Dexter Semi-Metallic Disc Brake Pads
- Search Results: k71~693~00
- Article: Cleaning Your RV Gray Water Tank in 5 Easy Steps
- Q&A: Does Dexter Vault System Work the Same As Bearing Buddy
- Q&A: Replacement Disc Brake Pads for Deemaxx 3,500 lbs to 6,000 lbs Axle Calipers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Comparing Dexter Surge Brake Actuators DX29FR And DX89FR
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Q&A: How to Determine Correct Replacement Ceramic Kodiak Brake Pads
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Install E-Track in 3 Easy Steps



Barry F.
8/6/2025
Please help. I need to replace the disc brake pads on my 2009 Classic Limited, Dexter axles. The pads in the K71-629-00 kits look similar to mine, except mine do not have the "wings" at the top. Will the pads with wings work? And if not, can I return them? Thank you. Barry