Trailer Hitch Receiver Capable Of Carrying a Motorcycle Behind a 2015 Toyota Highlander

Question

Question:

HI - I just wanted to make sure I can use a motorcycle hauler with this hitch as long as I stay below the tongue weight for my vehicle it is 500 lb. Thanks!

asked by: Drew

0

Expert Reply:

Yes, you can use the etrailer Motorcycle Carrier # e98873 with the Curt Trailer Hitch Receiver # C13394 on your 2015 Toyota Highlander. Be sure to include the weight of the carrier(58lbs) along with the weight of your bike and any Straps # SS6-SL14 (5lbs) used to secure it in place. Be sure to verify your receiver tongue weight along with ensuring you do not exceed the GVWR for your Highlander as well.

Depending on the size of your bike you may need to add some Auxiliary Lights # C53201 to the carrier if our bike impairs the view of your tail lights. You will need the T-One Vehicle Wiring Harness # 118449 to connect to your Highlander so that you have a 4-way to connect the additional lighting.

If you determine that your motorcycle is too big for your Highlander you can use a small Trailer # K2MMT5X7 to haul your bike.

expert reply by: Bud M

0

Answer 1

I am not aware of any instance where a trailer hitch properly installed on a Toyota Highlander has been broken or bent. As long as the 5000 lb towing capacity/500 lb tongue weight of the #C13394 or the 6000 lb towing/900 lb tongue weight capacity of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Donald! For a hitch that fits your 2018 Toyota Highlander I recommend the Curt #C13394. Unlike the other options, this hitch has a concealed cross tube so only the receiver is visible at the rear of your vehicle. That also means you have better…

view full answer...

Answer 7

We do have 3 trailer hitches designed to fit your 2019 Toyota Highlander, so I certainly understand your feeling of being a bit overwhelmed. The available hitches can be pretty easily broken down into two categories; hidden and non-hidden. The…

view full answer...

Answer 8

Hi Barney! I have the six hitches we have available for your 2019 Toyota Highlander listed below with their corresponding weights: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98844 - 43.68 pounds…

view full answer...

Answer 9

For the Curt Trailer Hitch Receiver to be mounted to your 2017 Toyota Highlander Limited there are 2 panels that will need to be trimmed. The underbody panel on the non-exhaust side needs to be trimmed to accept the receiver so that it can bolt to…

view full answer...

Answer 10

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 11

Hey Mark, thanks for the details! The Curt T-Connector #C56217 is actually designed for a Toyota Highlander or a newer model RX350 L which is one reason you're struggling to find the right connector on your 2019 Lexus RX350 L. Since your Lexus…

view full answer...

Answer 12

For the Curt T-Connector Vehicle Wiring Harness #C56217 on your 2021 Lexus RX 350L the connectors will be located in a different spot. The 10 pin connector should be located on the passenger side just below the taillight. The 4 pin connector will be…

view full answer...

Trailer Hitch Receiver Capable Of Carrying a Motorcycle Behind a 2015 Toyota Highlander

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching