Comparing etrailer & Draw-Tite Trailer Hitch Receivers for 2022 Chevy Equinox

Question

Question:

Can you tell me what the difference, if any, there is of the Draw-tite and etrailer hitches for a 2022 chevy equinox? i do not have the diesel model. thanks!

asked by: Bryce

0

Expert Reply:

There is very little actual difference between the two trailer hitch receivers that fit your 2022 Chevy Equinox (non-diesel model), which are the following part numbers:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 76419

- etrailer Trailer Hitch Receiver # e59ZR

The biggest difference is actually in the installation, with the Draw-Tite not requiring you to enlarge the access holes in the frame rail to get the hardware through to install, an extra step the Curt hitch requires. Otherwise, the two both have have concealed crosstubes, which is a nice look for your Equinox, and have the same 4,500 lb towing and 675 lb tongue weight capacity.

They are similar enough that if it were me, I'd just go with the one that has the better price.

expert reply by: Kyle S

0

Answer 1

Yes, it does. The Draw-Tite Hitch item #76419 is confirmed to fit the 2024 Chevy Equinox. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity…

view full answer...

Answer 2

Yes, it does! The Draw-Tite Hitch item #76419 has been confirmed to fit the 2024 Chevrolet Equinox. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. I have attached an…

view full answer...

Answer 3

I will try to keep this as simple and basic as possible. Cost effective 2" hitch for your 2018 Chevry Equinox: -Draw-Tite Max-Frame Trailer Hitch Receiver #76419. Wiring harness that only has stop/turn/tail functions (aka 4-way): -T-One Vehicle…

view full answer...

Answer 4

The trailer hitch that I recommend for a 2020 Chevrolet Equinox is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76419 because it has a hidden design which means you won't see the bulky, unsightly cross tube from the rear of the vehicle so…

view full answer...

Answer 5

We have hitches for the 2019 Chevrolet Equinox but the #36408 Draw -Tite is not a fit because there's a generation change after 2017. Instead, if you want to keep a 1-1/4 inch receiver the only option is part #36642 If you'd rather upgrade…

view full answer...

Answer 6

Good news! There is a confirmed fit for a hitch for your 2024 Chevrolet Equinox. - Curt Trailer Hitch Receiver #C77FR This hitch is assembled in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is…

view full answer...

Answer 7

I would be happy to clear things up for you! The correct trailer wiring harness for your 2022 Chevy Equinox without the tow package will depend on which trim model it is. If your Equinox is the Premier model then you will need to go with the Tekonsha…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Comparing etrailer & Draw-Tite Trailer Hitch Receivers for 2022 Chevy Equinox

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching