Replacement Bearing Kit Needed for a 10ft 1995 Triton Lite Trailer
Updated 11/25/2013 | Published 11/22/2013
Products Featured in This Question
Question:
I have a 1995 triton lite 10. It has straight spindles. The axel is a dexter. Its a 5 bolt hub. Which is the correct assembly?
asked by: Andrew
Expert Reply:
It looks like the 10 ft Triton Lite trailers were built with 2,000 lb Dexter axles. There are two bearing kits we carry that may work for you and the best way to determine which kit is the correct kit for your trailer is to compare the part numbers of your current bearings with the part numbers of the bearing kits. Bearing Kit, # BK1-150, uses L44649 inner and outer bearings. Bearing Kit, # BK1-100, uses L44643 inner and outer bearings. The part number of the bearings will be stamped into the metal of the bearing.
If you do not have the current or the bearings are too damaged to identify, the second best method is to measure the spindle using a precise measuring tool like a dial caliper. The difference between the diameters of the spindles these bearing kits fit is only a few hundredths of an inch, so it is important that we know the exact diameter of your spindles.
I have attached a diagram and a table that shows where to measure on your spindle and what those measurements should be for each bearing kit. The diagram also shows where you can locate the part numbers on the bearing and grease seal.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit - BT8 Spindle, Bearings L44643, Races L44610, Seal 34823
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: triton trailer hubs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub for 1994 Triton Lite Snowmobile Trailer with L44649 Bearings
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Q&A: How to Easily Transport a 10 Kayak with a 2013 Chevrolet Equinox
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Article: Most Popular Wheel Bearings
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
on Trailer Bearings Races Seals Caps
