Trailer Hitch For A 2019 Ram ProMaster 3500

Question

Question:

Have a 3500 promaster one ton extended is that what ext is. Also is the class 3 right or can a 4 or 5 work thanx bruce

asked by: Bruce K

0

Answer 1

If the grounding nut/bolt are being used on your 2021 Ram ProMaster 2500, you are correct in that the Curt #C13207 will not be the best option for you. With that said, I recommend going with the Curt #C13295. This will install behind the bumper beam…

view full answer...

Answer 2

We can definitely accomplish your goal, which is to have a wiring connector on your 2022 Ram ProMaster 3500 with both a 7-way and a 4-way. While you cannot use the #C58DR without connecting it, the 7-way adapter you'll use actually has a plug on…

view full answer...

Answer 3

For wiring harness for the 2022 Ram ProMaster 3500 EXT, I recommend Wiring Harness #C58DR. For a trailer hitch use the Curt #C13295.

view full answer...

Answer 4

I recommend installing our etrailer Trailer Hitch Receiver #e99AR on your 2023 Ram ProMaster 3500 extended with the super high roof. This receiver mounts behind the rear bumper beam and will fit both the extended and non-extended models. I prefer our…

view full answer...

Answer 5

Yes, the Universal Installation Kit for Trailer Brake Controller item #ETBC7 does fit the 2021 Ram ProMaster 1500 so long as you have a 4-way wiring harness installed like the Curt T-Connector Vehicle Wiring Harness item #C58DR. The item #ETBC7 kit…

view full answer...

Answer 6

From the sounds of your question, it looks like you are looking for a hitch solution that allows you to fit a full-sized spare tire underneath your 2021 Winnebago Solis Motorhome. The only feasible option is a hitch that is designed to work with your…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Trailer Hitch For A 2019 Ram ProMaster 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching