Does DeeZee Specialty Series Driver's-Side Wheel Well Tool Box Work With Camper Shell

Question

Question:

Are they suitable for beds with a shell?

asked by: Steven C

0

Expert Reply:

Depending on how the camper shell installs, you may be able to use the DeeZee Specialty Series Driver's-Side Wheel Well Tool Box # DZ95.

The # DZ95 installs with brackets that attach to the inside of the bed rail as you can see in the cut out of the instructions I added. So long as there is not any interference with your camper shell, the toolbox will be compatible.

expert reply by: Kyle S

0

Mounting of DeeZee Specialty Series Driver's-Side Wheel Well Tool Box # DZ95
(click to enlarge)

Answer 1

I spoke with my contact at DeeZee, who did not have any information as to whether or not the box would fit in front of the wheel well, rather than in its typical installation behind it. However, the foot or bottom of the box is 17 inches in length.…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

Hey Tod, the two UWS boxes have different shapes and capacities. If you check out the attached pictures you can see the differences between the part #UWS08298 and #UWS01044 to get a better idea. The #UWS01044 has a slightly smaller capacity at 8.2…

view full answer...

Answer 5

The back portion of the UWS Secure Lock Truck Bed Chest #UWS08298 is 12-1/2" tall and the canister for the RetraxPRO MX Hard Tonneau Cover #RT80384 is going to sit 11-5/8" down from the top of the bedrails. From what I can find online a…

view full answer...

Answer 6

Hi Aaron! The DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style - Aluminum - 14.9 Cu Ft - Black #DZ8560WB weighs 66 pounds. I have a diagram with measurements attached as well. Figured you could probably use them. : ) Are you going to…

view full answer...

Answer 7

Hello Michael, The Curt Custom Base Plate Kit - Removable Arms #C55KR is going to be a great fit for your 2018 GMC Sierra 1500, and your Blue Ox BX7335 Aventa II tow bars will connect perfectly to the Curt base plate. Are you new to flat towing, or…

view full answer...

Answer 8

Hi Pete; since the DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style #DZ8560WB is a wide model it does not come with a tool tray or have one available from DeeZee. They have the #DZTBTRAY1 but it is only designed for 20" wide…

view full answer...

Answer 9

The BAK Revolver X4s Hard Tonneau Cover, short bed #BAK99ZR or long bed #BAK49ZR, measures about 8" when rolled up. It doesn't roll up completely up to the front so it will probably hang over the bed about 9" or 10" so you'll…

view full answer...

Answer 10

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Does DeeZee Specialty Series Driver's-Side Wheel Well Tool Box Work With Camper Shell

Product Page this Question was Asked From

Continue Researching