TorkLift Frame-Mounted Camper Tie-Down Fit For 2012 Ram 2500 4WD w/ 6-1/2 Foot Short Bed

Question

Question:

Torklift frame-mounted camper tie downs for a 2012 Ram 2500, 4WD 6 1/2 bed are TLD2119 and TLD3109, I believe. Is this correct? What other years do these fit?

asked by: Phil G

0

Expert Reply:

You are correct about the TorkLift frame-mounted camper tie-downs that fit your 2012 Ram 2500 4WD with a 6-1/2 foot bed, though they only fit if you do NOT have running boards or steps underneath the truck bed. They fit 2010-2013, with the parts for the front and back being the following:

- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2119

- Back: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109

Along with the tie-downs, the only other thing you will need are turnbuckles, and for that the best option by far are the TorkLift Locking FastGun Turnbuckles because they easiest to use with their lever-action handles, and are also locking to help protect your investment. They come in a quantity of four and you can choose from different colors:

- TorkLift Locking FastGun Turnbuckles - Gray # TLS9522-2-LK, Black # TLS9529-2-LK, or Polished Stainless Steel # TLS9526-2-LK

The Locking FastGun are a more premium option however, so for more economical turnbuckles you will need a quantity of two of either the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs # TLS9000 or TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9050A.

expert reply by: Kyle S

0

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLD2140 and #TLD3113, front and rear will fit your 2020 Ram 2500, tie-down inserts, frame brackets, and all necessary hardware is included. As for turnbuckles there is a wide selection at varying…

view full answer...

Answer 2

For a 13,500 btu AC unit like the Dometic Brisk Air 2 you'd need a starting wattage of right at 3,000 watts. For that your best option is the A-iPower 3,800-Watt Portable Inverter Generators - 3,000 Running Watts - Gas - Manual Start…

view full answer...

Answer 3

view full answer...

Answer 4

Hey Gene, welcome back! The correct tie-downs are the TorkLift Talon item #TL45SV, you were looking at. This a set of front and rear tie-downs. The rear ones will attach directly to your 2025 Ford F-450's TorkLift SuperHitch Magnum hitch item…

view full answer...

Answer 5

Hey Mike, welcome back! The 2-1/2" shanks have the same channel size as the 2" shank for the Andersen Weight Distribution Hitch so they all work for the same system. We didn't have the 2-1/2" shanks available separately so I went…

view full answer...

Answer 6

Hey, Daniel! All depends on how long your truck bed is and some other details about your truck. The kit you were looking at, part #TL22SV, is for a 6-3/4 foot bed that's equipped with a factory hitch that has an open-ended crosstube and is…

view full answer...

Answer 7

Yes, you can Jeff! You can still use your F-350's hitch to pull a trailer with the TorkLift Tie Downs item #TL87DR installed. You will most likely need an extension though to clear your in bed camper if you plan on towing a trailer with it in…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Paul, congrats on the new truck. The TorkLift Talon Truck Camper Tie-Downs Front and Rear item #TL85SV or item #TL45SV if you have a Torklift SuperHitch fit the 2025 F-350's with an 8' bed but not the 2019s. What kind of hitch do you have…

view full answer...

Answer 10

Hey Jack, yes the Torklift camper tie downs part #TL63PR are the correct set for your 2024 Ford F-350 Tremor with a short bed and factory hitch. The turnbuckles part #TLS9526-2 that you referenced as well would be a great set that matches what you…

view full answer...