Where Should the Slide Be Positioned When Replacing the Idler Head on a Slide Out Awning
Updated 08/04/2022 | Published 08/02/2022
Question:
When installing the replacement idler head does the slide out need to be all the way in or out? Any other things I need to know?
asked by: Robert H
Helpful Expert Reply:
I contacted the manufacturer about the proper installation of the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning # LC87FR.
It should be installed approximately 5-6 inches away from the side of the camper (slide topper opened 5-6inches). There needs to be 14 turns of tension on each side of the slide topper arms (14 turns counter clockwise on idler side, 14 turns clockwise on drive side).
It is strongly suggested to have a qualified dealer/technician make the repairs due to the high amount of tension the springs are under in the slide out tube.
Product Page this Question was Asked From
Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Accessories and Parts
- RV Awnings
- Head Parts
- Rollbars
- Head Assembly - Manual
- Solera Replacement
- Idler Head
- Black
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: rv sewer hoses
- Video: Replacing the Lippert Solera RV Slide-Out Awnings Head and Roll Bar - 2017 Forest River Forester Mot
- Q&A: Replacement Hex Extension Rod For Solera Slide Toppers
- Shop: Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Shop: Replacement Bracket Kit for pre-2019 Solera RV Slide-Out Awnings - Black
- Q&A: Replacement End Caps For Lippert Solera 1000 Series Slide Topper Awning
- Shop: Replacement Idler Head Assembly for Solera Manual Pull-Style Awnings - Black
- Shop: Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Shop: Replacement Extension Rod for pre-2022 Solera RV Slide-Out Awning - Black - Qty 1
- Video: Hands-On with the Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings
- Video: Feature Review Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings
- Video: Breaking Down the Replacement Idler Head Assembly for Solera Manual Pull-Style Awnings
- Video: Detailed Breakdown of the Replacement Bracket Kit for pre-2019 Solera RV Slide-Out Awnings
- Video: Camco RV Sewer - Hoses - CAM39551 Review
- Shop: Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
- Shop: Camco Easy Slip RV Sewer Hose w/ Pre-Attached Bayonet and Elbow Fittings and 4-in-1 Adapter
- Video: Installation: Solera RV Slide-Out Awning on a 2021 Grand Design Reflection Fifth Wheel
- Q&A: Instructions For Replacing Drive Head and Idler Head On a Solera Slide Out Topper Awning
- Q&A: Do You Have To Remove The Solera Slide Topper To Replace The Idler Head On The Roller Tube?
- Q&A: Replacement Driver Head and Idler Head for Lippert Solera Slide Out Awning
- Q&A: RV Furnace Recommendation to Replace Atwood 2334DCLP
- Q&A: Replacement Water Valve for Dometic Pedal Flush RV Toilets
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Performance Chips and Modules
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Trailer Wiring Diagrams
on Accessories and Parts
