Maxxair RV Vents and Fans - Roof Vent - MA00-03900 Review

content loading



Customers compare MA00-03900 to these similar products




Products Featured in this Video



Review of Maxxair Accessories and Parts MA00-03900


Speaker 1: Today we're gonna take a look at the Maxxair Maxxshade roller shade for RV roof vents and fans, and this comes in white.This is gonna be a nice option for a roller shade for non-powered roof vents and 12-volt powered ventilation fans. It is going to be fully retractable with that spring-loaded roller shade, so as you can see we have this little indention here. You just pull on that, and it's going to spring back into the housing. So you can see it just snaps open. And then to secure it back, there are the two small snap-lock closures, so that whenever we press it to the other side, it's going to snap into place and hold it closed.Now this is not going to interfere with the normal operation of your vent or ventilation fan. On the underside, or the side that'll actually be facing up, it's going to have this reflective surface that's going to block sunlight and also reflect the heat back out.

This does have an easy install with the included screws. They're going to be a sunk-bolt style with that conical head at the top, and they are painted white to make those a little bit more discrete. You're going to have four of those that come with the kit, as well as two wire nuts and two quick-splice connectors. These are not necessary for the installation of this roller shade, but they do come with it. You can use those for another application if you like.Now as far as the dimensions on this, the outer housing from outside edge to outside edge, that's going to be 19 and a half inches, by 18 and three-quarters.

The mounting plate inside is going to have two different options as far as how to mount it. You'll have a narrower footprint here, and then a wider one at the outside. The outside dimensions are going to be 17 and a quarter by 13 and three-quarter, going from those two outside mounting holes. The inner ones are going to be 15 and a half, or 12 inches. So it gives you an idea of the space that you need to mount this up.And again, this is going to be just an easy install, just those four screws to put in place, and you'll be ready to go.And that's going to do it for our look at the Maxxair Maxxshade roller shade for RV roof vents and fans.

Speaker 2: inaudible 00:02:43.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Kathleen M
Installed by:
Randy B
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.