Recommended Bug Screens For MaxxAir II Vent Covers

Question

Question:

I have two MaxxAir II Vent Covers that I just purchased. Neither one have bug screens in them. Will these replacementinch screens work in them? And if they will, how do they stay secured inside the vent cover?

asked by: Jon L

1

Helpful Expert Reply:

The Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers # MA10-20121 are the correct bug screens for a MaxxAir II Vent Cover. The screens just snap into the cover for an easy installation.

expert reply by: Kevin C

1

Answer 1

Yes, the correct replacement bug screen for your MaxxAir II RV and Trailer Roof Vent Cover part #MA76JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part #MA10-20121.

view full answer...

Answer 2

We do have replacement bug screens for the Maxxair II Vent Covers with the part #MA10-20121.

view full answer...

Answer 3

The Replacement Bug Screen #MA10-20121 is for some of the older models of the MaxxAir II vent cover which had a panel on the inside that you pop out and then you can place the screen against the cover and replace the panel to keep the bug screen in…

view full answer...

Answer 4

Retainers are not included with the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers #MA10-20121. This part comes with just the screen, which will snap into the vent cover.

view full answer...

Answer 5

The MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA26JR that you referenced can be used with the MaxxAir MaxxFan Plus #MA00-04500K that you are interested in. You may know this already but the #MA00-04500K comes with a rain sensor that will…

view full answer...

Answer 6

Yes, the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955001 is the correct cover for your MaxxAir 4500K fan that you have now.

view full answer...

Answer 7

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 8

For the MaxxAir MaxxFan Plus vents you can use the MaxxAir cover #MA00-955003. It is 22-1/8" long x 20-1/8" wide x 9-3/8" tall.

view full answer...

Answer 9

No the MAXX AIR II Vent Cover #MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

view full answer...

Answer 10

Yes, the MaxxAir II RV Roof Vent #MA76JR is designed for exactly that. This will do a great job of protecting your RV/trailer interior from the elements. It will also allow you to still operate the vent when you're stuck inside the trailer due to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hi Hayden; that bolt pattern is really uncommon but I believe it can be found on some really old Airstream trailers. There are no modern replacements that will match. The best option is to replace the hub with one that has a common bolt pattern like…

view full answer...

Recommended Bug Screens For MaxxAir II Vent Covers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching