What Trucks Can a Curt Q25 for Chevy/GMC Prep Package without Slider Be Used In  

The main difference between the Curt A-Series part #C24FR and Q-Series part #C97FR is the head and jaw design. The A-Series has dual interlocking jaws which form a much tighter grip on the kingpin than just a standard set that butt up at the end like…

The little tech note on Reese's page is worded a bit misleadingly. The Sidewinder Wedge Kit for Curt E-Series Fifth Wheel Trailer Hitches #RP64FR you were looking at is only compatible with the Curt E-Series hitches, which is why it says not to…

To convert your Curt A16 hitch to fit directly to the OEM rail kit of your 2021 GMC Sierra 3500 all you need is the leg kit part #CU53FR and you'd be set.

We tend to stick with the safe side of things and just recommend using a sliding 5th wheel hitch if you don't have an 8' bed, but we have heard and seen people 5th wheel tow just fine using a non-sliding hitch on a 6-3/4' bed. We've…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.

All the MORryde Cushioned 5th Wheel Pin Boxes #MR57VR, #MR37VR and #MR97VR will share the same dimensions and are nearly identical to the Lippert 1716 5th Wheel Pin Box #LC1324791. I have attached a technical drawing for the MORryde pin boxes similar…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…