Replacement Bearing Seals for 2022 Forest River Rockwood Mini Lite 2516S

Question

Question:

replacement bearing seal for my 2022 Forest river rockwood 2516s mini lite. which seal to replace wiyh

asked by: Phillip J

0

Expert Reply:

It looks like your 2022 Forest River Rockwood Mini Lite 2516S has 3,500 lb axles which means the correct replacement seal should be part # 58846 (part # RG06-050 for 2 of them) which has an inner diameter of 1.719" and an outer diameter of 2.565".

I recommend double checking this on your end to make sure this is the correct size for your application.

expert reply by: Jon G

0

Answer 1

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Answer 2

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

view full answer...

Answer 3

In almost all cases 3,500 lb axles will all use the same bearings. If your trailer has a Lippert or Dexter 3,500 lb axle then yeah they would be the same. But to be safe it won't hurt to pull them off and get the numbers. If you are sure you need…

view full answer...

Answer 4

Sounds like you have the trailer hub part #8-247-50UC3-EZ installed on your trailer. That means for a grease seal you would need the part #RG06-050.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

I sure can Blake! I just heard back from Dexter and both of your axles are 3,500 lbs capacity. That's all the information they were able to provide. Here are the replacement parts you've requested: Hub/Drums - 5 on 4-1/2 Lug Nut Pattern item…

view full answer...

Answer 8

Hey Ron, the correct grease seal for a 3,500 lb trailer axle would be the part #58846. Are you repacking your bearings?

view full answer...

Answer 9

Hello again Jim, Thanks for writing in! You're looking at the correct seal. The GS-1719 DL and TRP markings are the important identifiers, and they match the Double Lip Grease Seal #58846 (or for 2 pack #RG06-050). The additional numbers, such as…

view full answer...

Answer 10

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 11

Hi Bill! The snap ring style bearing setups have been phased out, so there is not a kit with that replacement included, but we do have Replacement Outer Snap Ring for 35mm, 42mm, and 50mm Dexter Nev-R-Lube Bearings #69-96 which is confirmed for axles…

view full answer...

Answer 12

Hey James! You can use the Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR with your Coleman Mach 10. It will work with your newer 35000 series in addition to the other ones listed on the product page. What kind of trailer do you have and…

view full answer...

Replacement Bearing Seals for 2022 Forest River Rockwood Mini Lite 2516S

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching