Fitment of the etrailer Hitch - 2" # e38KR on a 2022 Hyundai Tucson Hybrid

Question

Question:

does this fit a 2022 Hyundai Tucson hybrid?

asked by: Dave

1

Helpful Expert Reply:

Yes, the etrailer Hitch - 2" # e38KR fits all models of 2022 Hyundai Tucson including your Hybrid model. I went ahead and attached screenshot of a neighbor review who installed this hitch on his 2022 Tucson Hybrid.

expert reply by: Bob C

1

Neighbor Review of the etrailer - 2" # e38KR
(click to enlarge)

Answer 1

Hello Ken, It looks like the measurement for the Curt and the Eco are going to be the same. We have not been able to do the install on the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #EH82KR but after reviewing the instructions the…

view full answer...

Answer 2

Hello Steve, I really wish I had an install video for the wiring, but we do not at this time. We do have trailer wiring that will work for your 2025 Hyundai Tucson, the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and…

view full answer...

Answer 3

The etrailer hitch part #e38KR is a confirmed fit for your 2024 Kia Sportage hybrid and would be what I would recommend. This hitch is mostly hidden since only the hitch opening hangs below the bumper and it has great towing capacities.

view full answer...

Answer 4

Both the Curt item #C94WR and the etrailer item #e38KR are confirmed to fit the 2023 Kia Sportage. These hitches are identical with the exception that the etrailer hitch has a matte black powder coat finish that offers superior rust protection. Both…

view full answer...

Answer 5

For your 2022 Hyundai Tucson I recommend the etrailer Trailer Hitch Receiver #e38KR. This receiver is made in the USA and has a matte black powder coat finish that blends well with the factory trim. It is rated for a maximum tongue weight capacity of…

view full answer...

Answer 6

Hi Brian; what hitch do you have on your Tucson? If it is an etrailer #e38KR or Curt #C94WR it uses six hex bolts, M10 x 1.25–35mm, CL 10.9. If it is the Draw-Tite #DT22MR it uses six hex bolts, M10 X 1.25 X 35 CL 8.8. If you have the EcoHitch…

view full answer...

Answer 7

The bolts for the Curt Trailer Hitch Receiver #C13240 are M10-1.25 x 30 inch hex bolts, and they are already threaded. I have added links below for you to check out of the instructions and a video install on a 2020 Hyundai Tucson of the Curt Trailer…

view full answer...

Answer 8

You're correct, the Draw-Tite #75776 hitch uses M10 x 1.25 x 30 bolts to attach the hitch to the nuts welded into the frame. It's extremely rare that the wrong hardware is sent out with a hitch, I've only seen it happen once or twice in…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Fitment of the etrailer Hitch - 2" # e38KR on a 2022 Hyundai Tucson Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching