Are Bolts for Curt Trailer Hitch Receiver on Hyundai Tucson Threaded

Question

Question:

What size bolts are used to mount hitch on bottom of frame they are already pre threaded

asked by: Terry

0

Expert Reply:

The bolts for the Curt Trailer Hitch Receiver # C13240 are M10-1.25 x 30 inch hex bolts, and they are already threaded.

I have added links below for you to check out of the instructions and a video install on a 2020 Hyundai Tucson of the Curt Trailer Hitch Receiver # C13240.

expert reply by: Kyle S

0

Gary S.

6/25/2024

Is the bolts for a 2016 Tucson hitch M10-1.25x30? I bought one and it doesn’t come with hardware

Kyle S.

6/25/2024

@GaryS Yes they are, so long as you have the Curt hitch # C13240.

Answer 1

The weld nuts were probably still dirty, when you were installing the hitch which caused the weld nut to brake off when putting torque on it. If you have not already installed the other bolts, you will want to clean them out with WD-40 and wire brush…

view full answer...

Answer 2

Yes, the etrailer Hitch - 2" #e38KR fits all models of 2022 Hyundai Tucson including your Hybrid model. I went ahead and attached screenshot of a neighbor review who installed this hitch on his 2022 Tucson Hybrid.

view full answer...

Answer 3

For your 2022 Hyundai Tucson I recommend the etrailer Trailer Hitch Receiver #e38KR. This receiver is made in the USA and has a matte black powder coat finish that blends well with the factory trim. It is rated for a maximum tongue weight capacity of…

view full answer...

Answer 4

Hi Brian; what hitch do you have on your Tucson? If it is an etrailer #e38KR or Curt #C94WR it uses six hex bolts, M10 x 1.25–35mm, CL 10.9. If it is the Draw-Tite #DT22MR it uses six hex bolts, M10 X 1.25 X 35 CL 8.8. If you have the EcoHitch…

view full answer...

Answer 5

You're correct, the Draw-Tite #75776 hitch uses M10 x 1.25 x 30 bolts to attach the hitch to the nuts welded into the frame. It's extremely rare that the wrong hardware is sent out with a hitch, I've only seen it happen once or twice in…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Are Bolts for Curt Trailer Hitch Receiver on Hyundai Tucson Threaded

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching