Size of Spindle/Castle Nut for an 84 Spindle
Products Featured in This Question
Question:
what size and thread count of castle nut do I need to fit a #84 spindle?
asked by: Dan
0
Expert Reply:
For an 84 spindle the correct castle nut would be item # 165686 which is a 1 inch spindle nut. It has 14 threads per inch.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Correct Bearing Kit For Dexter 8-247 Hub on E-Z Lube Spindle
- Search Results: bearing grease packer
- Search Results: grease lubricants sealants adhesives
- Search Results: trailer hubs and drums
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Trailer Spindle Nut 1"
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Q&A: Help With Filling a Hub With Grease On a Trailer Axle With #84 Spindle
- Search Results: spindle nut
- Shop: Vehicle Engine Heaters
- Search Results: sw1000
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Q&A: Spindle Nut Recommendation for 84 Spindle
- Video: All You Need to Know About the Kodiak Ceramic Brake Pads
- Search Results: 568861
- Q&A: Recommended Spindle Nut and Washer To Use With Bearing Kit for #84 Spindles
- Q&A: Is LubriMatic High Temperature Grease Better Than LubriMatic Marine Grease
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: All About the Kodiak Ceramic Brake Pads
- Search Results: khr10d
- Video: All About the Grease Seal
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: The Low-Down on the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Article: Overview of Lubricating Grease