Which Grease Cap And Spindle Nut Do I Need For Bearing Kit # BK2-100
Updated 08/31/2022 | Published 08/30/2022
Products Featured in This Question
Question:
Hi, Is it possible to have the spindle nut with the kit and the grease cap with the kit BK2-100 Thank you
asked by: Ian C
Helpful Expert Reply:
The Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles # BK2-100 does not come with the grease cap and spindle nut. You will have to purchase them separate.
The Grease Cap # RG04-040 has a 1.99 inch outer diameter. The cap has a drive-in installation.
The Trailer Spindle Nut # 165686 has a bare metal finish and is for 1 inch spindles.
I attached a review video link below.
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Curt Spectrum Brake Controller w/Universal Harness - Dash Mounted Knob - 1 to 4 Axles - Proportional
- Shop: Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Shop: Composite Trim Removal Tool Kit - 5 Piece
- Search Results: dust cap driver tool
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: bottle jack
- Search Results: rv seal
- Search Results: spindle nut socket
- Search Results: rocker switch
- Search Results: switch
- Search Results: trim tool
- Video: Detailed Breakdown of the Curt Trailer Connector Adapter with Backup Alarm
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: Curt Brake Controller C51515 Review
- Q&A: Dexter 8-247-Hub Bearing Buddy and Bearing Kit Fit
- Video: Feature Breakdown: Snap Bushing Grommet
- Q&A: Bearing Kit, 10 x 2-1/4 Hydraulic Brake Shoes, and Grease Cap for Dexter 3500 EZ Lube Axle
- Q&A: Is Bearing Buddy Needed On EZ-Lube Hub and Spindle
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Q&A: Replacement Bearings For Dexter Axle On A 1999 Jayco Pop-Up Camper
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
on Trailer Hubs and Drums
