Will Curt 15312 Trailer Hitch Receiver Fit 2001 Chevy Silverado 3500 With Standard Bumper

Question

Question:

I have a 2001 Silverado 3500 4x4 dually with 8.1L engine, extended cab, 8foot box LT I believe the C15312 is the correct hitch to fit my truck with the standard bumper, correct? I want a class V hitch.

asked by: Darrel P

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15312 will fit your 2001 Silverado 3500 with the standard factory bumper. This Class V hitch features a bolt-on installation and comes with a lifetime warranty.

expert reply by: Robin H

1

Answer 1

The Curt Trailer Hitch Receiver part #C15312 is what I recommend as a replacement for the factory trailer hitch on a 2002 Chevrolet Silverado 2500HD. In regards to the bolt hole spacing, this will be a different for the Curt Trailer Hitch Receiver as…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…

view full answer...

Answer 8

Hey Michael, We have some hitch options available but I'll need a bit more information on your Silverado in order to find the correct fit. The available hitches are sectioned out by model (1500, 2500, 3500), bed length, and bumper type. If you…

view full answer...

Answer 9

Hey Eric, Using only 4 of the 5 mounting holes on #DE28YR is not recommended when installing new brakes. There is a chance of failure that could cause a lot more problems, it is best to install them exactly how they should be. With that said by far…

view full answer...

Answer 10

Hey Justin, thanks for reaching out! The Curt Trailer Hitch Receiver #C15312 will fit the long bed on your 2006 Chevy Silverado 2500HD so you're good to go!

view full answer...

Answer 11

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…

view full answer...

Answer 12

In regards to the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25189, the distance from the flange to the top of the receiver tube is 3-1/8" and the distance from the rearmost mounting hole to the end of the receiver tube is…

view full answer...

Will Curt 15312 Trailer Hitch Receiver Fit 2001 Chevy Silverado 3500 With Standard Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching