How to Connect Brake Controller Brake Light Wire on 2022 Toyota Highlander  

We currently do not have any installation videos for the Redarc Encapsulated Power Diode #RED34FR being used to install the Redarc Tow-Pro Liberty Brake Controller #RED24FR with the Harness #RED69FR and Panel #RED48FR for any vehicles or your 2021…

I would not recommend installing a Diode #RM-690 on the brake line as this is a part which can fail and if it were to you could risk doing a lot of damage. While the Bright Way Push-to-Test ICU Trailer Breakaway Kit #BW94FR could risk damage to your…

The correct trailer wiring harness for a 2021 Toyota Highlander without factory tow package is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #TK99FR which plugs in behind the taillights. The correct trailer wiring harness…

There sure is! The Redarc Encapsulated Power Diode for Tow-Pro Brake Controllers #RED34FR you were looking at gets wired as shown in the included diagram. One of the red wires goes to the red brake output wire on your trailer brake controller, the…

Yes, you will want to use a single function diode, like part #RM-690. You will need to wire it in between the breakaway battery and the trailer battery to stop the backfeeding from the battery to the breakaway system.

The first thing you will need to do to get a 7-way and brake controller installed on your 2022 Toyota Highlander is to get a 4-way connector. The T-One Vehicle Wiring Harness with 4-Pole Flat #TK99FR will be plug directly into existing wiring located…

Excellent question Paul. We have our Install Kit #ETBC7 which will allow you to plug into the factory 4-way on your 2024 Toyota Highlander XLE. It also includes additional wiring you will need for installing a charge line and brake controller which…

The best solution for your problem is going to be installing the Roadmaster Universal Stop Light Switch Kit #RM-751000. This will give you separate wire you can easily access and you won't have to worry about causing any damage to the wiring on…

You will need the Stop Light Switch Kit #RM-751449 for your 2019 Jeep Grand Cherokee. This will provide you with a brake signal as the factory brake switch wiring is very thin and not recommended for splicing into. This switch includes a custom fit…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…