Recommended In-Bed 7-Way Trailer Connector for 2022 Ram 3500

Question

Question:

2022 Ram 3500 - I have a 7 blade plug plus a camera plug on my bumper. Do you offer an adapter kit to duplicate these plugs inside the bed for a gooseneck.

asked by: Travis F

0

Expert Reply:

The Curt 5th Wheel/Gooseneck Custom Wiring Harness part # C56070 is what I recommend for a 2022 Ram 3500. This will tee in behind the factory trailer connector at the bumper and provide a seven way connection in the truck bed for fifth wheel and gooseneck towing.

Please note, there is currently no option to duplicate the camera plugs into the truck bed.

expert reply by: Conner L

0

Answer 1

B&W is definitely going to be your best option for your 2022 Ram 2500. The B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1320 will allow you to tow a gooseneck trailer and since the ball stores upside down inside the hitch you will…

view full answer...

Answer 2

They really are very similar and interchangeable but the #MR84VR is for replacing a Lippert 1621 pin box whereas the part #MR94VR is for replacing a Trailair setup that also was for the 1621SHD.

view full answer...

Answer 3

For all fifth wheel trailer hitches, lubrication is important to keep working parts in order and allow your fifth wheel hitch to turn properly. B and W recommends lubricating the top surface of your fifth wheel hitch coupler with automotive type…

view full answer...

Answer 4

Hey Tom, I'm assuming your Ram already has a 7-way at the bumper. In this case, you're just going to need to add the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector #C56000 which will plug into your existing wring and allow…

view full answer...

Answer 5

Yes, the MORryde Cushioned 5th Wheel Pin Box #MR84VR will work with your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package #BWRVK3600 on your 2015 Ram 2500.

view full answer...

Answer 6

You can definitely use a cushioned pin box with the B&W Companion 5th Wheel Trailer Hitch #BWRVK3670 like a Mor-Ryde, Trailair, or 5th Airborne.

view full answer...

Answer 7

Yes it does! The B&W Companion 5th Wheel Hitch #BWRVK3600 that fits your 2018 Ram 2500 with the factory puck system is completely compatible with a MORryde cushioned pin box. This is a fantastic set up, giving you a cushioned pin box along with…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended In-Bed 7-Way Trailer Connector for 2022 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching