Can B&W Companion Companion Hitch be Used with Mor/Ryde Cushioned Pin Box

Question

Question:

HAVE A 2017 DODGE RAM 3500 WITH 5TH WHEEL PREP PACKAGE. HAVE A JAYCO 355MBQS WITH MORRYDE PIN BOX. IS THE RVK 3670 COMPATIBLE WITH THIS PIN BOX?

asked by: MIKE R

1

Helpful Expert Reply:

You can definitely use a cushioned pin box with the B&W Companion 5th Wheel Trailer Hitch # BWRVK3670 like a Mor-Ryde, Trailair, or 5th Airborne.

expert reply by: Jameson C

1

Answer 1

Hey Tom, I'm assuming your Ram already has a 7-way at the bumper. In this case, you're just going to need to add the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector #C56000 which will plug into your existing wring and allow…

view full answer...

Answer 2

The Curt 5th Wheel/Gooseneck Custom Wiring Harness part #C56070 is what I recommend for a 2022 Ram 3500. This will tee in behind the factory trailer connector at the bumper and provide a seven way connection in the truck bed for fifth wheel and…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item #PUL28RR. The PullRite SuperGlide 5th Wheel Hitch item #PUL28RR has a 24,000 lbs capacity and…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hey Ken, welcome back! So this is a really great question but at the end of the day the Curt A25 part #C16046 and the B and W Companion part #BWRVK3600 that both fit the OEM pucks of your 2026 Ram 3500 are really nice hitches that you can't go…

view full answer...

Answer 10

Hey Jerry, thanks for reaching out. The short answer is yes, probably but it really depends on your exact setup. When you slide the Companion back, you gain cab clearance but lose space at the tailgate, and with a MorRyde pin box being a bit bulkier,…

view full answer...

Answer 11

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Answer 12

The Curt A25 #C16046 and Q25 #C16049 are both excellent 5th wheel hitches however there are a few upgrades on the newer Curt A25 #C16049 that make it the superior hitch and my personal recommendation. The primary difference between the two models is…

view full answer...

Can B&W Companion Companion Hitch be Used with Mor/Ryde Cushioned Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching