Replacement Water Heater Option For A Atwood AT94023 On A 2004 Itasca Suncruiser

Question

Question:

I have a 2004 Itasca Suncruiser and the atwood water heater is mounted inside one of the basement compartments. The compartment door closes over the water heater with a small cutout in the compartment door to vent the water heater. Any replacement must take into account where the vent in the compartment door is located, What can you suggest?

asked by: Harold R

0

Expert Reply:

For your 2004 Itasca Suncruiser, with an Atwood RV Water Heater w/ Heat Exchange AT94023, which is no longer available, I recommend going with the Dometic RV Water Heater # DMC74FR.

This tank is a bit smaller at 6 gallons, versus AT94023 10 gallon capacity, but will also produce up to 12 gallons of hot water per hour, which should be plenty.

Additionally, this unit has an aluminum clad tank, that does a great job preventing corrosion, and also has a high-temperature limit switch, which will automatically shut off the unit if the temperature threshold is exceeded.

expert reply by: Bryce D

0

Claude S.

3/18/2024

Is this replacement tank still in production and fit as suitable replacement or is there another newer option? Thank you

Bryce D.

3/19/2024

@ClaudeS Yes the Dometic RV Water Heater # DMC74FR is still in production and is still a great replacement option. I'd say if you were upgrading though, I'd just get a tankless # FR98SR so you can have on demand hot water.

Bryce D.

3/19/2024

@ClaudeS Yes the Dometic RV Water Heater # DMC74FR is still in production and is still a great replacement option. I'd say if you were upgrading though, I'd just get a tankless # FR98SR so you can have on demand hot water.

Claude S.

6/22/2024

@BryceD I’ll surely look into it now. As you know the season is now lol and my “mechanic” had become very unreliable so hopefully it is an easy install where I can do it myself.

See All (6) Replies to Claude S. ∨

Answer 1

Hi Devon; all of the Atwood G6A models are 6 gallon water heaters with some slight variation within the models which is why you see the Dometic #DMC74FR (Gas/Electric) or #DMC39RR (Gas only) recommended as the replacement. The same is true for your…

view full answer...

Answer 2

Hey Juan. The Furrion RV Tankless Water Heater item #FR98SR requires a cutout space of 12-3/4" to 12-13/16" wide a height of 12-5/8" to 12-3/4" and a minimum depth of 23-1/2". I can't give you a definite yes or no because…

view full answer...

Answer 3

The Camco RV Replacement Water Heater Element #CAM04363 fits most water heaters that have a 8 inch minimum tank diameter. The element has a copper tubing with magnesium oxide and nickel plating that will help it resist corrosion. I attached a review…

view full answer...

Answer 4

Thanks for all of the dimensions! For your application I recommend picking up the Furrion Tankless #FR48SR instead because it has a 16"x18" door which looks closer to what you currently have. The cutout is only 12-3/4" to…

view full answer...

Answer 5

I do have an option for you. But I can tell you that the feature you have with the hose coming from the engine through the water heater is no longer available. Since you are needing to replace your GCH10A-3E water heater, I recommend going with a…

view full answer...

Answer 6

The closest replacement we have for the Atwood RV Water Heater GE16-EXT is the Atwood RV Water Heater w/ Heat Exchange GCH10A-4E part #AT94023 that we offer. The GCH10A-4E has both gas and electric features just like the GE16-EXT as well as a 10…

view full answer...

Answer 7

The correct replacement for an Atwood RV Water Heater GC10A-3E is the Atwood RV Water Heater part #AT94022 or GC10-4E. This water heater measures 16" tall x 15-1/2" wide x 20-7/8" deep which should be an exact match for what you have…

view full answer...

Answer 8

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Water Heater Option For A Atwood AT94023 On A 2004 Itasca Suncruiser

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching