Recommended Trailer Hub And Drum For A Snowmobile Trailer
Updated 04/26/2022 | Published 04/25/2022
Products Featured in This Question
Question:
I acquired a 30 year old utility snowmobile trailer. I wanted to repack the bearings. I believe that the axle is 1”. The inner bearing has the number L44610. The outer bearing has the number L44643. I would like to replace the bearings and or replace the entire hub. Could you please let me know what I should consider purchasing from you.
asked by: Mark B
Expert Reply:
When it comes replacing trailer hub and drums with the axle being 1 inch The Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-EZ-1K will work.
The outer bearing you provided # L44643 matches with this system. The # L44610 is actually an inner race for the inner bearing # L44643. This galvanized finished hub offer excellent corrosion resistance, making it ideal for your snowmobile trailer. All bearings, races, and grease seal are included.
This hub and drum is compatible with standard axles from most manufacturers including Dexter, Lippert, and AL-KO.
I attached a review video link below.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: marine grade trailer hubs and drums
- Search Results: trailer hubs and drums
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub and Bearing Buddy for 1 inch Spindles with 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Replacement Hub w/ a 5 on 4-1/2 Lug Pattern and L44643 Inner and Outer Bearings
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
