Replacement Hub and Bearing Buddy for 1 inch Spindles with 5 on 4-1/2 Inch Bolt Pattern
Updated 05/28/2019 | Published 05/26/2019
Products Featured in This Question
Question:
Looking for a super lube 5 on 4.5 hub for 1 spindle Im looking for a super lube 5 on 4.5inch hub for a 1inch spindle. My spindle is a regular, non-super lube spindle, so Im looking for the hub to have a zerk fitting that gives the same functionality. From what I can tell, none of your hubs have the zerk fitting, but just the special dust cap.
asked by: Chad B
Expert Reply:
Since you have a 1 inch spindle, you will want the Trailer Idler Hub Assembly for 2,000-lb Axles - 8" to 12" Wheels - 5 on 4-1/2 # AKIHUB-545-2-1K and then you will want the Bearing Buddy Grease caps that have the grease zerk. For those caps I recommend the Chrome # BB1980A or Stainless Steel # BB1980A-SS. These grease caps are spring loaded to help you get the right amount of grease and make sure the spindle and bearings are well maintained. Unfortunately that fitting correctly means you will have the cover instead of a standard grease cap or even an EZ-Lube grease cap, but the function is exceptional.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: marine grade trailer hubs and drums
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub w/ a 5 on 4-1/2 Lug Pattern and L44643 Inner and Outer Bearings
- Q&A: Recommended Trailer Hub And Drum For A Snowmobile Trailer
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer wiring
- Shop: Brake Controller
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer jack
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Gooseneck Hitch
on Trailer Hubs and Drums
