Can The Furrion Vision S Camera Work With The Factory Camera On A 2022 Ram 2500

Question

Question:

Can dodge cameras hook to furion system

asked by: Roy S

0

Expert Reply:

When installing The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3 inch Screen # FOS43TASF it's designed to work with the monitor that is included with the camera. We currently do not carry a system that would connect to your vehicle's factory monitor.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The 12 volt power on the 7-way will not have enough juice for an electric winch so there's no way to use the 7-way like you wanted. The best option for your winch is really using a quick connect wiring kit, the Bulldog Winch Wiring Kit for…

view full answer...

Answer 2

The wiring kit I recommend installing on your 2024 Ram 2500 is the Pollak 5th Wheel / Gooseneck T-Connector #PK11893-11932 which tees in behind the 7-Way at your bumper and installs in your truck bed. I really like the Pollak kit because of how…

view full answer...

Answer 3

We do have Curt custom 5th wheel base rails and installation kits that fit your 2020 Ram 2500 with a 6-1/2 foot bed, but they are a bit different than the part number you mentioned. The two kits that fit have the same brackets, but you can choose…

view full answer...

Answer 4

If you are wanting something light weight then the Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR is the right hitch for you. The CrossWing weighs in at 87 lbs. The main concern with using the CrossWing on your 2021 Ram 2500 is that…

view full answer...

Answer 5

Hi Eric, So the Trailair system you were referring to needs standard center hangers, and the LRE doesn't use that, as you know, because they have the rubberized shear hanger. That means the Trailair won't work with what you have, but there is…

view full answer...

Answer 6

Hello Loren, Congrats on the new Chevy 3500! What’s your favorite feature so far? We have a Furrion camera system that’s ready to plug into the pre-wired mount on your Grand Design Reflection 273MK, but it will require a second monitor in the cab of…

view full answer...

Answer 7

As you noted, the main difference is that part #FOS43TASF has a 4.3" monitor and part #FOS05TASF has a 5" monitor. Both provide up to 16' of night vision and the same resolution. The 4.3" can only support 1 camera where the 5"…

view full answer...

Answer 8

The measurements for the Lippert 1716 5th Wheel Pin Box - 15,500lbs #LC1324791 are as follows: 3A: 20-3/8" 3B: 29-1/8"

view full answer...

Answer 9

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 10

Hey Mike. I have a solution for you but what your asking isn't going to work. The Lippert 1716 5th Wheel Pin Box item #LC1324791 you referenced fits a 1716 bolt pattern, which is not compatible with your trailer's 1621 pin box. The closest…

view full answer...

Answer 11

Hey Rodney, thanks for reaching out! Your ProPride 3P is probably overrated for your 2025 GeoPro 20FBS, but it all depends on what model 3P you have. If its the 3P-800 or 3P-1000 model then it will be right in the sweep spot for your trailer and…

view full answer...

Answer 12

Hello Herb, thanks for reaching out. The Furrion Vision S+ Wireless RV Observation System #FR64AD does have a motion detector on the rear camera. You can insert a micro SD memory card in the monitor which allows it to record footage at night. You can…

view full answer...

Can The Furrion Vision S Camera Work With The Factory Camera On A 2022 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching