Replacement Hub and Drum Assembly for 15,000 Pound Axles
Updated 03/22/2022 | Published 03/20/2022
Products Featured in This Question
Question:
Hello, I’m looking for a solution to rebuild/retrofit the hubs on a 1980’s Miller Tilt Top tag trailer. The axles are 15k, floating tandem duallies with greased bearings. Ultimate goal is to get away from the clamped split rim and go to a more modern setup.
asked by: Matthew F
Expert Reply:
Although I do not have an option to retrofit your hubs I do have a solution. What I can offer is a complete replacement with the Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles # DX78QR. If you're just looking for replacement races, bearings, and seals we have those available as well.
This hub uses an 8 on 275 mm bolt pattern. It would also require switching to oil bath from the grease. In addition to the hub and drum assembly, or for replacement bearings and seals, you would need the following parts:
Replacement Dexter Axle 4-3/4" x 1-1/2"-20 Press-In Wheel Stud - Qty 1 # DX97XR
Replacement Race for 3984 Bearing # 3920
Replacement Race for 28682 Bearing # 28622
Replacement Trailer Hub Bearing - 3984 # 3984
Replacement Trailer Hub Bearing - 28682 # 28682
Replacement Brake Drum Mounting Bolt for Dexter Trailer Hub Assembly - 10,000 lbs - Qty 1 # 7-103
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle # RG04-270
Oil Seal # 10-56 (this can be used with grease as well)
Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle # XLPROLUBE
I have attached some review and installation videos for your reference.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 3984 / 28682
- Standard Grade
- For 15000 lbs Axles
- 5/8 Inch Stud
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 28682
- Search Results: bp01~330
- Search Results: brake magnet
- Search Results: 8~401
- Shop: Oil Seal
- Shop: Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Shop: Dexter Trailer Hub Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Shop: Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Hub and Drum Assembly for Heavy-Duty 15K Axles - 8 on 275mm Oil Bath
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs
- Shop: Trailer Wiring
- Search Results: demco trailer brakes
- Shop: Gooseneck Hitch
- Search Results: dexter trailer suspension parts
- Search Results: dexter 13 122
- Video: Replacement Brake Drum Mounting Bolt for Dexter Trailer Hub Assembly Review
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Replacement Dexstar Trailer Wheel with 17-231 Sticker
- Q&A: Replacement Inner Parts for Demco 12.5K Weld-On Actuator
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Overall Width of Lippert RV Spare Tire Carrier part # LC159041
- Q&A: Replacement Brake Pads For Kodiak Disc Brake Kit with 13 Rotors
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: How to Measure a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle