Bearing and Seal Kit for Lippert 4.4k Trailer Axle

Question

Question:

I have a Lippert 4,400 LBS axel, serial number is S005294729, Item V000297603. What bearings and seal do I need for this axel? Thank you.

asked by: Travis E

0

Expert Reply:

Hey Travis, the Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 for a kit that includes the correct bearings and seal. Are you doing yearly maintenance or are you wanting to have a spare set on hand?

expert reply by: Jameson C

0

Travis E.

4/6/2026

Routine maintenance, doing a repack and want them on hand just in case.

Jameson C.

4/6/2026

@TravisE not a bad idea at all!

Answer 1

I believe you almost solved the problem when you swapped the wiring, but in reality you needed to use 10 gauge wire like part #10-1-1 (sold by the foot). You are experiencing a voltage drop due to the long distance of wire that's not thick…

view full answer...

Answer 2

The best option for you is going to be to crawl under the trailer and read the tag on the center of the axle. This will tell you the weight capacity of your axle which will be needed to find the correct replacement braking assembly. I can see from…

view full answer...

Answer 3

We have exactly what you need for the bearings and seals for a Lippert 4,400 lb axle, which is Bearing Kit #BK2-100. This kit includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter…

view full answer...

Answer 4

The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part #BK2-100 which comes with bearings, races, and seals. It looks like the 85 number you have found in your part…

view full answer...

Answer 5

For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.

view full answer...

Answer 6

For your 7K Lippert Axle I'd go with the etrailer #AKEBRK-7-SA you were looking at. They will be a direct replacement, and will include both sides for one axle, if you have two axles, you're going to need two of these. I really like the…

view full answer...

Answer 7

AxleTek is who makes our etrailer brake assemblies like the #AKEBRK-35-SA. We have found that while not considered to be as much of a premium brand like the Dexter assemblies they work just as well and happen to cost a lot less. To put it a different…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Bearing and Seal Kit for Lippert 4.4k Trailer Axle

Product Page this Question was Asked From

Continue Researching