Replacement Head for Curt A30 5th Wheel Hitch

Question

Question:

I damaged the plate of my hitch. I need to replace the plate. I dont need the piece that the plate sits on. Pull the large pin and lift the plate off, thats the part I need. Can I purchase only that part ?? If so, how much ?? And whats the part number. Any questions to clarify my need, please feel free to call me at 909 917-4403 Thanks

asked by: David

0

Expert Reply:

Unfortunately, Curt doesn't offer just the head unit of their # C66HR A30 5th wheel hitch as a separate item, it's only available as a kit with the center section which we offer as part # C16590.

expert reply by: Mike L

0

Answer 1

The correct replacement circuit and control board for your Lippert Electronic leveling system is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System #LC421484. This will be a plug and play solution, so…

view full answer...

Answer 2

Brandon, the Curt A30 head #C16590 can not be used with the Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package #C25JR. These legs are only going to be able to be used with the Curt PowerRide Head #C56WR. For the A30, you'd need…

view full answer...

Answer 3

Hey Bob, thanks for the information! For a weight distribution system that fits an 18,000 lbs trailer, you'll want the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW2000. This system works with tongue weights from 1,500 - 2,000 lbs…

view full answer...

Answer 4

Thank you for all of the information! I definitely have some recommendations for you but I do encourage you to get that OEM suspension looked at especially if you think it used to look different prior to your last trip. Any suspension enhancement…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Head for Curt A30 5th Wheel Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching